#line 1 "/media/sam/8294CD2994CD2111/Users/Dell/Documents/Arduino/voice_assistant/led_control.h"
#pragma once
#include <Freenove_WS2812_Lib_for_ESP32.h>
#include "config.h"

// Initialize (LED_COUNT, LED_PIN, CHANNEL, TYPE)
// Channel 0 is fine.
Freenove_ESP32_WS2812 strip(NUM_LEDS, LED_PIN, 0, TYPE_GRB);

enum DeviceState {
  STATE_IDLE,
  STATE_WAKE_DETECTED,
  STATE_RECORDING,
  STATE_TRANSMITTING,
  STATE_ACK_RECEIVED,
  STATE_ERROR
};

DeviceState currentState = STATE_IDLE;
unsigned long stateTimer = 0;

void setupLEDs() {
  strip.begin();
  strip.setBrightness(30);
  strip.show(); // Off
}

// Helper for Color compatibility
uint32_t Color(uint8_t r, uint8_t g, uint8_t b) {
  return strip.Wheel((r << 16) | (g << 8) | b); // Not used by this lib but keeps API
}

void setRingColor(uint32_t r, uint8_t g, uint8_t b) {
  strip.setAllLedsColor(r, g, b);
}

// Overload for compatibility with previous code calling Color()
// We actually just need to rewrite the helper slightly
void setRingColor(uint32_t color) {
  // Extract RGB from 32-bit int
  uint8_t r = (uint8_t)(color >> 16);
  uint8_t g = (uint8_t)(color >> 8);
  uint8_t b = (uint8_t)color;
  strip.setAllLedsColor(r, g, b);
}

void updateLEDs() {
  switch (currentState) {
    case STATE_IDLE:
      strip.setAllLedsColor(0, 0, 0); 
      break;
    case STATE_WAKE_DETECTED:
      strip.setAllLedsColor(255, 0, 0);
      break;
    case STATE_RECORDING:
      strip.setAllLedsColor(0, 255, 0);
      break;
    case STATE_TRANSMITTING:
      strip.setAllLedsColor(0, 0, 255);
      break;
    case STATE_ERROR:
      strip.setAllLedsColor(255, 255, 255);
      break;
    case STATE_ACK_RECEIVED:
      // Simple rainbow
      for (int j = 0; j < 255; j += 2) {
        for (int i = 0; i < NUM_LEDS; i++) {
          strip.setLedColorData(i, strip.Wheel((i * 256 / NUM_LEDS + j) & 255));
        }
        strip.show();
        delay(10);
      }
      currentState = STATE_IDLE;
      break;
  }
}