Files
nixos-4screen/docs/nixos_build_spec.md
2026-02-08 14:17:52 +11:00

3.1 KiB

NixOS Build Spec (sam-4screen-desktop)

Disk / Boot (DO NOT BRICK WINDOWS)

Target disk: /dev/nvme0n1

  • Size: 953.87 GiB (1024209543168 bytes), 2000409264 sectors
  • Model: PM951 NVMe SAMSUNG 1024GB
  • NVMe serial: S2FZNXAH301424
  • NVMe WWID: nvme.144d-2020202020205332465a4e584148333031343234-504d393531204e564d652053414d53554e4720313032344742-00000001
  • Sector size (logical/physical): 512 bytes / 512 bytes Install target is NVMe only. Do not select /dev/sdX devices in the installer. Device names like /dev/sdb, /dev/sdc can change across boots; always rely on UUID/label.

NOTE: GPT partition table entries may not be stored/printed in on-disk (Start sector) order.

  • Do NOT rely on the order shown by some tools.
  • Always identify partitions by (partition number + type + UUID/label).
  • If you need the physical order, sort by the “Start” sector column (e.g. fdisk -l output).

Verification commands (run before formatting):

  • lsblk -o NAME,SIZE,TYPE,FSTYPE,LABEL,UUID,MOUNTPOINTS
  • sudo fdisk -l /dev/nvme0n1 (interpret physical order by sorting on Start)
  • sudo blkid /dev/nvme0n1p1 /dev/nvme0n1p3 /dev/nvme0n1p4 /dev/nvme0n1p5

KEEP (do not format):

  • /dev/nvme0n1p1 (EFI vfat) UUID=94CC-9DA4 (~99MiB, FAT32, mounted at /boot/efi)
  • /dev/nvme0n1p2 (MS reserved) (~15MiB)
  • /dev/nvme0n1p3 (Windows NTFS) UUID=8294CD2994CD2111 (~503GiB)
  • /dev/nvme0n1p4 (Windows recovery NTFS) UUID=6E1AA32B1AA2EEF1 (~529MiB)

WIPE + install NixOS here:

  • /dev/nvme0n1p5 (currently Ubuntu ext4 /) UUID=4e99904c-ce6f-4c3c-898a-e29cfc373489 (~449GiB)

Other attached disks (DO NOT FORMAT)

  • /dev/sda (240GB) model: Patriot Burst El (KEEP)
    • /dev/sda1: Microsoft reserved partition (~15MiB)
    • /dev/sda2: NTFS label "Back Up" (keep)
  • TempBackup (ext4) UUID=4f9c4bd5-fea5-408f-9370-731fc095da3f (~465GiB/500GB) (KEEP)
    • Model: WD5000BEVT-22ZAT
    • Serial: WD-WXNY08ND2684
    • NOTE: device name may appear as /dev/sdb or /dev/sdc depending on boot/USB order; identify by UUID/label/model.
  • Integral300 (ext4) UUID=27febd74-20aa-4a3a-92c1-6fdd1ad7e88e (~298GiB/320GB) (mount at /data)
    • NOTE: device name may change; config always uses /dev/disk/by-uuid.
  • XPSystemDrive (ext4) UUID=82c994f1-9adb-49e4-ba1e-5b6e5ccbd49b (~149GiB/160GB) (KEEP)
    • Model: HTS541616J9SA00 (Hitachi)
    • NOTE: device name may appear as /dev/sdX depending on boot/USB order; identify by UUID/label/model.
    • Observed in hardware scan: /dev/sde (do not rely on this).

Bootloader:

  • systemd-boot, using the existing EFI partition (/dev/nvme0n1p1)

Networking

  • Use NetworkManager
  • Static IPv4 for wired: enp0s31f6 = 192.168.20.27/24
  • Gateway: 192.168.20.1
  • DNS: 192.168.20.35, 192.168.20.13

Data drive mount

  • Integral300 ext4 UUID=27febd74-20aa-4a3a-92c1-6fdd1ad7e88e
  • Mountpoint on NixOS: /data (preferred)

Desktop

  • Primary compositor: Niri
  • Display/login manager: greetd + tuigreet
  • Session start command: niri --session (do not use niri-session)
  • GPU: Intel HD 630 + NVIDIA Quadro P620
  • Display appears to be driven by NVIDIA Quadro P620 (observed /dev/fb0 on Ubuntu scan). Treat NVIDIA as primary unless proven otherwise.

Secrets policy

  • No API keys or WiFi PSKs committed to git