initial commmit

This commit is contained in:
Sam
2025-05-22 16:26:07 +10:00
commit 9ba0ff268f
1292 changed files with 225422 additions and 0 deletions

View File

View File

View File

View File

@@ -0,0 +1,7 @@
CMake Error at run_serial_tool.cmake:67 (message):
C:/Espressif/tools/python_env/idf5.4_py3.11_env/Scripts/python.exe;;C:/Espressif/frameworks/v5.4.1/esp-idf/components/esptool_py/esptool/esptool.py;--chip;esp32s3
failed.

View File

View File

@@ -0,0 +1,78 @@
info: INFO: Symbol MQTT_PROTOCOL_311 defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:3
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:3
info: INFO: Symbol MQTT_PROTOCOL_5 defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:9
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:9
info: INFO: Symbol MQTT_TRANSPORT_SSL defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:15
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:15
info: INFO: Symbol MQTT_TRANSPORT_WEBSOCKET defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:21
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:21
info: INFO: Symbol MQTT_TRANSPORT_WEBSOCKET_SECURE defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:28
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:28
info: INFO: Symbol MQTT_MSG_ID_INCREMENTAL defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:36
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:36
info: INFO: Symbol MQTT_SKIP_PUBLISH_IF_DISCONNECTED defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:43
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:43
info: INFO: Symbol MQTT_REPORT_DELETED_MESSAGES defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:53
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:53
info: INFO: Symbol MQTT_USE_CUSTOM_CONFIG defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:60
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:60
info: INFO: Symbol MQTT_TCP_DEFAULT_PORT defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:66
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:66
info: INFO: Symbol MQTT_SSL_DEFAULT_PORT defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:73
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:73
info: INFO: Symbol MQTT_WS_DEFAULT_PORT defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:81
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:81
info: INFO: Symbol MQTT_WSS_DEFAULT_PORT defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:89
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:89
info: INFO: Symbol MQTT_BUFFER_SIZE defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:98
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:98
info: INFO: Symbol MQTT_TASK_STACK_SIZE defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:105
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:105
info: INFO: Symbol MQTT_DISABLE_API_LOCKS defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:112
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:112
info: INFO: Symbol MQTT_TASK_PRIORITY defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:120
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:120
info: INFO: Symbol MQTT_POLL_READ_TIMEOUT_MS defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:127
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:127
info: INFO: Symbol MQTT_EVENT_QUEUE_SIZE defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:134
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:134
info: INFO: Symbol MQTT_TASK_CORE_SELECTION_ENABLED defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:141
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:141
info: INFO: Symbol MQTT_USE_CORE_0 defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:149
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:149
info: INFO: Symbol MQTT_USE_CORE_1 defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:151
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:151
info: INFO: Symbol MQTT_OUTBOX_DATA_ON_EXTERNAL_MEMORY defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:155
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:155
info: INFO: Symbol MQTT_CUSTOM_OUTBOX defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:162
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:162
info: INFO: Symbol MQTT_OUTBOX_EXPIRED_TIMEOUT_MS defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:173
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:173
info: INFO: Choice MQTT_TASK_CORE_SELECTION defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:146
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:146

View File

@@ -0,0 +1,7 @@
CMake Error at run_serial_tool.cmake:67 (message):
C:/Espressif/tools/python_env/idf5.4_py3.11_env/Scripts/python.exe;;C:/Espressif/frameworks/v5.4.1/esp-idf/components/esptool_py/esptool/esptool.py;--chip;esp32s3
failed.

View File

View File

View File

View File

File diff suppressed because one or more lines are too long

View File

@@ -0,0 +1,95 @@
[1/9] Performing build step for 'bootloader'
[1/1] C:\Windows\system32\cmd.exe /C "cd /D C:\Users\Dell\Documents\ESP\Keyboard_lights_2\build\bootloader\esp-idf\esptool_py && C:\Espressif\tools\python_env\idf5.4_py3.11_env\Scripts\python.exe C:/Espressif/frameworks/v5.4.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 bootloader 0x0 C:/Users/Dell/Documents/ESP/Keyboard_lights_2/build/bootloader/bootloader.bin"
Bootloader binary size 0x5220 bytes. 0x2de0 bytes (36%) free.
[2/9] No install step for 'bootloader'
[3/9] Completed 'bootloader'
[4/9] Building C object esp-idf/main/CMakeFiles/__idf_main.dir/app_main.c.obj
[5/9] Linking C static library esp-idf\main\libmain.a
[6/9] Generating ld/sections.ld
info: INFO: Symbol MQTT_PROTOCOL_311 defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:3
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:3
info: INFO: Symbol MQTT_PROTOCOL_5 defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:9
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:9
info: INFO: Symbol MQTT_TRANSPORT_SSL defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:15
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:15
info: INFO: Symbol MQTT_TRANSPORT_WEBSOCKET defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:21
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:21
info: INFO: Symbol MQTT_TRANSPORT_WEBSOCKET_SECURE defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:28
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:28
info: INFO: Symbol MQTT_MSG_ID_INCREMENTAL defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:36
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:36
info: INFO: Symbol MQTT_SKIP_PUBLISH_IF_DISCONNECTED defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:43
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:43
info: INFO: Symbol MQTT_REPORT_DELETED_MESSAGES defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:53
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:53
info: INFO: Symbol MQTT_USE_CUSTOM_CONFIG defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:60
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:60
info: INFO: Symbol MQTT_TCP_DEFAULT_PORT defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:66
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:66
info: INFO: Symbol MQTT_SSL_DEFAULT_PORT defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:73
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:73
info: INFO: Symbol MQTT_WS_DEFAULT_PORT defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:81
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:81
info: INFO: Symbol MQTT_WSS_DEFAULT_PORT defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:89
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:89
info: INFO: Symbol MQTT_BUFFER_SIZE defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:98
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:98
info: INFO: Symbol MQTT_TASK_STACK_SIZE defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:105
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:105
info: INFO: Symbol MQTT_DISABLE_API_LOCKS defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:112
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:112
info: INFO: Symbol MQTT_TASK_PRIORITY defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:120
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:120
info: INFO: Symbol MQTT_POLL_READ_TIMEOUT_MS defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:127
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:127
info: INFO: Symbol MQTT_EVENT_QUEUE_SIZE defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:134
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:134
info: INFO: Symbol MQTT_TASK_CORE_SELECTION_ENABLED defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:141
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:141
info: INFO: Symbol MQTT_USE_CORE_0 defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:149
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:149
info: INFO: Symbol MQTT_USE_CORE_1 defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:151
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:151
info: INFO: Symbol MQTT_OUTBOX_DATA_ON_EXTERNAL_MEMORY defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:155
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:155
info: INFO: Symbol MQTT_CUSTOM_OUTBOX defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:162
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:162
info: INFO: Symbol MQTT_OUTBOX_EXPIRED_TIMEOUT_MS defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:173
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:173
info: INFO: Choice MQTT_TASK_CORE_SELECTION defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:146
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:146
[7/9] Linking CXX executable Keyboard_lights_2.elf
[8/9] Generating binary image from built executable
esptool.py v4.8.1

View File

@@ -0,0 +1,78 @@
[1/5] C:\Windows\system32\cmd.exe /C "cd /D C:\Users\Dell\Documents\ESP\Keyboard_lights_2\build\esp-idf\esptool_py && C:\Espressif\tools\python_env\idf5.4_py3.11_env\Scripts\python.exe C:/Espressif/frameworks/v5.4.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 partition --type app C:/Users/Dell/Documents/ESP/Keyboard_lights_2/build/partition_table/partition-table.bin C:/Users/Dell/Documents/ESP/Keyboard_lights_2/build/Keyboard_lights_2.bin"
Keyboard_lights_2.bin binary size 0xf28c0 bytes. Smallest app partition is 0x100000 bytes. 0xd740 bytes (5%) free.
[2/5] Performing build step for 'bootloader'
[1/1] C:\Windows\system32\cmd.exe /C "cd /D C:\Users\Dell\Documents\ESP\Keyboard_lights_2\build\bootloader\esp-idf\esptool_py && C:\Espressif\tools\python_env\idf5.4_py3.11_env\Scripts\python.exe C:/Espressif/frameworks/v5.4.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 bootloader 0x0 C:/Users/Dell/Documents/ESP/Keyboard_lights_2/build/bootloader/bootloader.bin"
Bootloader binary size 0x5220 bytes. 0x2de0 bytes (36%) free.
[3/5] No install step for 'bootloader'
[4/5] Completed 'bootloader'
[4/5] C:\Windows\system32\cmd.exe /C "cd /D C:\Espressif\frameworks\v5.4.1\esp-idf\components\esptool_py && C:\Espressif\tools\tools\cmake\3.30.2\bin\cmake.exe -D IDF_PATH=C:/Espressif/frameworks/v5.4.1/esp-idf -D SERIAL_TOOL=C:/Espressif/tools/python_env/idf5.4_py3.11_env/Scripts/python.exe;;C:/Espressif/frameworks/v5.4.1/esp-idf/components/esptool_py/esptool/esptool.py;--chip;esp32s3 -D SERIAL_TOOL_ARGS=--before=default_reset;--after=hard_reset;write_flash;@flash_args -D WORKING_DIRECTORY=C:/Users/Dell/Documents/ESP/Keyboard_lights_2/build -P C:/Espressif/frameworks/v5.4.1/esp-idf/components/esptool_py/run_serial_tool.cmake"
esptool.py --chip esp32s3 -p COM4 -b 460800 --before=default_reset --after=hard_reset write_flash --flash_mode dio --flash_freq 80m --flash_size 2MB 0x0 bootloader/bootloader.bin 0x10000 Keyboard_lights_2.bin 0x8000 partition_table/partition-table.bin
esptool.py v4.8.1
Serial port COM4
Connecting....
Chip is ESP32-S3 (QFN56) (revision v0.2)
Features: WiFi, BLE, Embedded PSRAM 8MB (AP_3v3)
Crystal is 40MHz
MAC: 98:a3:16:e2:6c:54
Uploading stub...
Running stub...
Stub running...
Changing baud rate to 460800
Changed.
Configuring flash size...
Flash will be erased from 0x00000000 to 0x00005fff...
Flash will be erased from 0x00010000 to 0x00102fff...
Flash will be erased from 0x00008000 to 0x00008fff...
SHA digest in image updated
Compressed 21024 bytes to 13383...
Writing at 0x00000000... (100 %)
Wrote 21024 bytes (13383 compressed) at 0x00000000 in 0.7 seconds (effective 235.6 kbit/s)...
Hash of data verified.
Compressed 993472 bytes to 611687...
Writing at 0x00010000... (2 %)
Writing at 0x0001d434... (5 %)
Writing at 0x000297c5... (7 %)
Writing at 0x00032dc2... (10 %)
Writing at 0x0003c78b... (13 %)
Writing at 0x0004266c... (15 %)
Writing at 0x00048aa3... (18 %)
Writing at 0x0004ed7a... (21 %)
Writing at 0x00054e25... (23 %)
Writing at 0x0005b21f... (26 %)
Writing at 0x000618cf... (28 %)
Writing at 0x000678f7... (31 %)
Writing at 0x0006d31d... (34 %)
Writing at 0x00073077... (36 %)
Writing at 0x00078fa1... (39 %)
Writing at 0x0007ec09... (42 %)
Writing at 0x00084709... (44 %)
Writing at 0x0008a3f9... (47 %)
Writing at 0x00090556... (50 %)
Writing at 0x000966b4... (52 %)
Writing at 0x0009bc57... (55 %)
Writing at 0x000a0b3b... (57 %)
Writing at 0x000a5ce6... (60 %)
Writing at 0x000ab19a... (63 %)
Writing at 0x000b02c5... (65 %)
Writing at 0x000b550f... (68 %)
Writing at 0x000ba97b... (71 %)
Writing at 0x000c0724... (73 %)
Writing at 0x000c6114... (76 %)
Writing at 0x000cbeac... (78 %)
Writing at 0x000d1725... (81 %)
Writing at 0x000d6ea9... (84 %)
Writing at 0x000dd95c... (86 %)
Writing at 0x000e80f6... (89 %)
Writing at 0x000ee616... (92 %)
Writing at 0x000f4d3e... (94 %)
Writing at 0x000fb426... (97 %)
Writing at 0x00100425... (100 %)
Wrote 993472 bytes (611687 compressed) at 0x00010000 in 13.6 seconds (effective 585.0 kbit/s)...
Hash of data verified.
Compressed 3072 bytes to 103...
Writing at 0x00008000... (100 %)
Wrote 3072 bytes (103 compressed) at 0x00008000 in 0.1 seconds (effective 353.7 kbit/s)...

View File

@@ -0,0 +1,215 @@
[1/10] Building C object esp-idf/main/CMakeFiles/__idf_main.dir/app_main.c.obj
[2/10] Linking C static library esp-idf\main\libmain.a
[3/10] Performing build step for 'bootloader'
[1/115] Building C object esp-idf/log/CMakeFiles/__idf_log.dir/src/noos/log_timestamp.c.obj
[2/115] Building C object esp-idf/log/CMakeFiles/__idf_log.dir/src/log_timestamp_common.c.obj
[3/115] Building C object esp-idf/esp_rom/CMakeFiles/__idf_esp_rom.dir/patches/esp_rom_crc.c.obj
[4/115] Building C object esp-idf/log/CMakeFiles/__idf_log.dir/src/noos/log_lock.c.obj
[5/115] Building C object esp-idf/esp_rom/CMakeFiles/__idf_esp_rom.dir/patches/esp_rom_sys.c.obj
[6/115] Building C object esp-idf/esp_rom/CMakeFiles/__idf_esp_rom.dir/patches/esp_rom_uart.c.obj
[7/115] Building C object esp-idf/esp_rom/CMakeFiles/__idf_esp_rom.dir/patches/esp_rom_spiflash.c.obj
[8/115] Building C object esp-idf/esp_rom/CMakeFiles/__idf_esp_rom.dir/patches/esp_rom_gpio.c.obj
[9/115] Building C object esp-idf/esp_rom/CMakeFiles/__idf_esp_rom.dir/patches/esp_rom_efuse.c.obj
[10/115] Building ASM object esp-idf/esp_rom/CMakeFiles/__idf_esp_rom.dir/patches/esp_rom_longjmp.S.obj
[11/115] Building ASM object esp-idf/esp_rom/CMakeFiles/__idf_esp_rom.dir/patches/esp_rom_cache_writeback_esp32s3.S.obj
[12/115] Building C object esp-idf/esp_rom/CMakeFiles/__idf_esp_rom.dir/patches/esp_rom_systimer.c.obj
[13/115] Building C object esp-idf/esp_rom/CMakeFiles/__idf_esp_rom.dir/patches/esp_rom_print.c.obj
[14/115] Building C object esp-idf/esp_rom/CMakeFiles/__idf_esp_rom.dir/patches/esp_rom_wdt.c.obj
[15/115] Building C object esp-idf/esp_rom/CMakeFiles/__idf_esp_rom.dir/patches/esp_rom_cache_esp32s2_esp32s3.c.obj
[16/115] Building C object esp-idf/esp_hw_support/CMakeFiles/__idf_esp_hw_support.dir/port/esp32s3/esp_cpu_intr.c.obj
[17/115] Building C object esp-idf/esp_common/CMakeFiles/__idf_esp_common.dir/src/esp_err_to_name.c.obj
[18/115] Building C object esp-idf/esp_hw_support/CMakeFiles/__idf_esp_hw_support.dir/esp_memory_utils.c.obj
[19/115] Building C object esp-idf/esp_hw_support/CMakeFiles/__idf_esp_hw_support.dir/cpu.c.obj
[20/115] Building C object esp-idf/esp_hw_support/CMakeFiles/__idf_esp_hw_support.dir/port/esp32s3/cpu_region_protect.c.obj
[21/115] Linking C static library esp-idf\log\liblog.a
[22/115] Building C object esp-idf/esp_hw_support/CMakeFiles/__idf_esp_hw_support.dir/port/esp32s3/rtc_clk_init.c.obj
[23/115] Building C object esp-idf/esp_hw_support/CMakeFiles/__idf_esp_hw_support.dir/port/esp32s3/chip_info.c.obj
[24/115] Building C object esp-idf/esp_hw_support/CMakeFiles/__idf_esp_hw_support.dir/port/esp32s3/rtc_sleep.c.obj
[25/115] Building C object esp-idf/efuse/CMakeFiles/__idf_efuse.dir/esp32s3/esp_efuse_table.c.obj
[26/115] Building C object esp-idf/esp_system/CMakeFiles/__idf_esp_system.dir/esp_err.c.obj
[27/115] Building C object esp-idf/esp_hw_support/CMakeFiles/__idf_esp_hw_support.dir/port/esp32s3/rtc_clk.c.obj
[28/115] Building C object esp-idf/esp_hw_support/CMakeFiles/__idf_esp_hw_support.dir/port/esp32s3/rtc_init.c.obj
[29/115] Building C object esp-idf/esp_hw_support/CMakeFiles/__idf_esp_hw_support.dir/port/esp32s3/rtc_time.c.obj
[30/115] Building C object esp-idf/efuse/CMakeFiles/__idf_efuse.dir/esp32s3/esp_efuse_fields.c.obj
[31/115] Building C object esp-idf/efuse/CMakeFiles/__idf_efuse.dir/esp32s3/esp_efuse_rtc_calib.c.obj
[32/115] Building C object esp-idf/efuse/CMakeFiles/__idf_efuse.dir/src/esp_efuse_fields.c.obj
[33/115] Linking C static library esp-idf\esp_rom\libesp_rom.a
[34/115] Building C object esp-idf/efuse/CMakeFiles/__idf_efuse.dir/esp32s3/esp_efuse_utility.c.obj
[35/115] Building C object esp-idf/efuse/CMakeFiles/__idf_efuse.dir/src/esp_efuse_api.c.obj
[36/115] Building C object esp-idf/bootloader_support/CMakeFiles/__idf_bootloader_support.dir/src/bootloader_common_loader.c.obj
[37/115] Building C object esp-idf/bootloader_support/CMakeFiles/__idf_bootloader_support.dir/src/bootloader_clock_init.c.obj
[38/115] Building C object esp-idf/efuse/CMakeFiles/__idf_efuse.dir/src/esp_efuse_utility.c.obj
[39/115] Building C object esp-idf/efuse/CMakeFiles/__idf_efuse.dir/src/efuse_controller/keys/with_key_purposes/esp_efuse_api_key.c.obj
[40/115] Building C object esp-idf/bootloader_support/CMakeFiles/__idf_bootloader_support.dir/src/bootloader_common.c.obj
[41/115] Building C object esp-idf/bootloader_support/CMakeFiles/__idf_bootloader_support.dir/src/bootloader_mem.c.obj
[42/115] Building C object esp-idf/bootloader_support/CMakeFiles/__idf_bootloader_support.dir/src/bootloader_efuse.c.obj
[43/115] Building C object esp-idf/bootloader_support/CMakeFiles/__idf_bootloader_support.dir/src/bootloader_random.c.obj
[44/115] Linking C static library esp-idf\esp_common\libesp_common.a
[45/115] Building C object esp-idf/bootloader_support/CMakeFiles/__idf_bootloader_support.dir/src/secure_boot.c.obj
[46/115] Building C object esp-idf/bootloader_support/CMakeFiles/__idf_bootloader_support.dir/src/flash_encrypt.c.obj
[47/115] Building C object esp-idf/bootloader_support/CMakeFiles/__idf_bootloader_support.dir/src/bootloader_random_esp32s3.c.obj
[48/115] Building C object esp-idf/bootloader_support/CMakeFiles/__idf_bootloader_support.dir/bootloader_flash/src/flash_qio_mode.c.obj
[49/115] Building C object esp-idf/bootloader_support/CMakeFiles/__idf_bootloader_support.dir/src/flash_partitions.c.obj
[50/115] Building C object esp-idf/bootloader_support/CMakeFiles/__idf_bootloader_support.dir/src/bootloader_clock_loader.c.obj
[51/115] Building C object esp-idf/bootloader_support/CMakeFiles/__idf_bootloader_support.dir/bootloader_flash/src/bootloader_flash_config_esp32s3.c.obj
[52/115] Building C object esp-idf/bootloader_support/CMakeFiles/__idf_bootloader_support.dir/bootloader_flash/src/bootloader_flash.c.obj
[53/115] Building C object esp-idf/bootloader_support/CMakeFiles/__idf_bootloader_support.dir/src/bootloader_init.c.obj
[54/115] Building C object esp-idf/bootloader_support/CMakeFiles/__idf_bootloader_support.dir/src/esp32s3/bootloader_soc.c.obj
[55/115] Building C object esp-idf/bootloader_support/CMakeFiles/__idf_bootloader_support.dir/src/bootloader_console.c.obj
[56/115] Building C object esp-idf/bootloader_support/CMakeFiles/__idf_bootloader_support.dir/src/esp32s3/bootloader_sha.c.obj
[57/115] Linking C static library esp-idf\esp_hw_support\libesp_hw_support.a
[58/115] Building C object esp-idf/bootloader_support/CMakeFiles/__idf_bootloader_support.dir/src/bootloader_console_loader.c.obj
[59/115] Building C object esp-idf/bootloader_support/CMakeFiles/__idf_bootloader_support.dir/src/bootloader_utility.c.obj
[60/115] Building C object esp-idf/bootloader_support/CMakeFiles/__idf_bootloader_support.dir/src/esp_image_format.c.obj
[61/115] Building C object esp-idf/esp_bootloader_format/CMakeFiles/__idf_esp_bootloader_format.dir/esp_bootloader_desc.c.obj
[62/115] Building C object esp-idf/bootloader_support/CMakeFiles/__idf_bootloader_support.dir/src/bootloader_panic.c.obj
[63/115] Building C object esp-idf/bootloader_support/CMakeFiles/__idf_bootloader_support.dir/src/esp32s3/bootloader_esp32s3.c.obj
[64/115] Building C object esp-idf/hal/CMakeFiles/__idf_hal.dir/hal_utils.c.obj
[65/115] Building C object esp-idf/hal/CMakeFiles/__idf_hal.dir/mpu_hal.c.obj
[66/115] Building C object esp-idf/spi_flash/CMakeFiles/__idf_spi_flash.dir/spi_flash_wrap.c.obj
[67/115] Building C object esp-idf/hal/CMakeFiles/__idf_hal.dir/efuse_hal.c.obj
[68/115] Building C object esp-idf/hal/CMakeFiles/__idf_hal.dir/esp32s3/efuse_hal.c.obj
[69/115] Building C object esp-idf/soc/CMakeFiles/__idf_soc.dir/dport_access_common.c.obj
[70/115] Building C object esp-idf/soc/CMakeFiles/__idf_soc.dir/lldesc.c.obj
[71/115] Linking C static library esp-idf\esp_system\libesp_system.a
[72/115] Building C object esp-idf/soc/CMakeFiles/__idf_soc.dir/esp32s3/interrupts.c.obj
[73/115] Building C object esp-idf/hal/CMakeFiles/__idf_hal.dir/mmu_hal.c.obj
[74/115] Building C object esp-idf/soc/CMakeFiles/__idf_soc.dir/esp32s3/gpio_periph.c.obj
[75/115] Building C object esp-idf/soc/CMakeFiles/__idf_soc.dir/esp32s3/uart_periph.c.obj
[76/115] Building C object esp-idf/soc/CMakeFiles/__idf_soc.dir/esp32s3/adc_periph.c.obj
[77/115] Building C object esp-idf/soc/CMakeFiles/__idf_soc.dir/esp32s3/dedic_gpio_periph.c.obj
[78/115] Building C object esp-idf/soc/CMakeFiles/__idf_soc.dir/esp32s3/gdma_periph.c.obj
[79/115] Building C object esp-idf/hal/CMakeFiles/__idf_hal.dir/cache_hal.c.obj
[80/115] Building C object esp-idf/soc/CMakeFiles/__idf_soc.dir/esp32s3/spi_periph.c.obj
[81/115] Building C object esp-idf/soc/CMakeFiles/__idf_soc.dir/esp32s3/ledc_periph.c.obj
[82/115] Building C object esp-idf/soc/CMakeFiles/__idf_soc.dir/esp32s3/pcnt_periph.c.obj
[83/115] Building C object esp-idf/soc/CMakeFiles/__idf_soc.dir/esp32s3/sdm_periph.c.obj
[84/115] Building C object esp-idf/soc/CMakeFiles/__idf_soc.dir/esp32s3/rmt_periph.c.obj
[85/115] Building C object esp-idf/soc/CMakeFiles/__idf_soc.dir/esp32s3/lcd_periph.c.obj
[86/115] Linking C static library esp-idf\efuse\libefuse.a
[87/115] Building C object esp-idf/soc/CMakeFiles/__idf_soc.dir/esp32s3/temperature_sensor_periph.c.obj
[88/115] Building C object esp-idf/soc/CMakeFiles/__idf_soc.dir/esp32s3/i2s_periph.c.obj
[89/115] Building C object esp-idf/soc/CMakeFiles/__idf_soc.dir/esp32s3/i2c_periph.c.obj
[90/115] Building C object esp-idf/soc/CMakeFiles/__idf_soc.dir/esp32s3/timer_periph.c.obj
[91/115] Building C object esp-idf/soc/CMakeFiles/__idf_soc.dir/esp32s3/mcpwm_periph.c.obj
[92/115] Building C object esp-idf/soc/CMakeFiles/__idf_soc.dir/esp32s3/mpi_periph.c.obj
[93/115] Building C object esp-idf/soc/CMakeFiles/__idf_soc.dir/esp32s3/twai_periph.c.obj
[94/115] Building C object esp-idf/soc/CMakeFiles/__idf_soc.dir/esp32s3/touch_sensor_periph.c.obj
[95/115] Building C object esp-idf/soc/CMakeFiles/__idf_soc.dir/esp32s3/wdt_periph.c.obj
[96/115] Building C object esp-idf/soc/CMakeFiles/__idf_soc.dir/esp32s3/usb_dwc_periph.c.obj
[97/115] Building C object esp-idf/soc/CMakeFiles/__idf_soc.dir/esp32s3/sdmmc_periph.c.obj
[98/115] Building C object esp-idf/soc/CMakeFiles/__idf_soc.dir/esp32s3/rtc_io_periph.c.obj
[99/115] Building C object esp-idf/xtensa/CMakeFiles/__idf_xtensa.dir/eri.c.obj
[100/115] Generating project_elf_src_esp32s3.c
[101/115] Linking C static library esp-idf\bootloader_support\libbootloader_support.a
[102/115] Building C object esp-idf/xtensa/CMakeFiles/__idf_xtensa.dir/xt_trax.c.obj
[103/115] Building C object CMakeFiles/bootloader.elf.dir/project_elf_src_esp32s3.c.obj
[104/115] Building C object esp-idf/main/CMakeFiles/__idf_main.dir/bootloader_start.c.obj
[105/115] Linking C static library esp-idf\esp_bootloader_format\libesp_bootloader_format.a
[106/115] Building C object esp-idf/micro-ecc/CMakeFiles/__idf_micro-ecc.dir/uECC_verify_antifault.c.obj
[107/115] Linking C static library esp-idf\spi_flash\libspi_flash.a
[108/115] Linking C static library esp-idf\hal\libhal.a
[109/115] Linking C static library esp-idf\micro-ecc\libmicro-ecc.a
[110/115] Linking C static library esp-idf\soc\libsoc.a
[111/115] Linking C static library esp-idf\xtensa\libxtensa.a
[112/115] Linking C static library esp-idf\main\libmain.a
[113/115] Linking C executable bootloader.elf
[114/115] Generating binary image from built executable
esptool.py v4.8.1
Creating esp32s3 image...
Merged 2 ELF sections
Successfully created esp32s3 image.
Generated C:/Users/Dell/Documents/ESP/Keyboard_lights_2/build/bootloader/bootloader.bin
[115/115] C:\Windows\system32\cmd.exe /C "cd /D C:\Users\Dell\Documents\ESP\Keyboard_lights_2\build\bootloader\esp-idf\esptool_py && C:\Espressif\tools\python_env\idf5.4_py3.11_env\Scripts\python.exe C:/Espressif/frameworks/v5.4.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 bootloader 0x0 C:/Users/Dell/Documents/ESP/Keyboard_lights_2/build/bootloader/bootloader.bin"
Bootloader binary size 0x5220 bytes. 0x2de0 bytes (36%) free.
[4/10] No install step for 'bootloader'
[5/10] Completed 'bootloader'
[6/10] Generating ld/sections.ld
info: INFO: Symbol MQTT_PROTOCOL_311 defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:3
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:3
info: INFO: Symbol MQTT_PROTOCOL_5 defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:9
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:9
info: INFO: Symbol MQTT_TRANSPORT_SSL defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:15
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:15
info: INFO: Symbol MQTT_TRANSPORT_WEBSOCKET defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:21
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:21
info: INFO: Symbol MQTT_TRANSPORT_WEBSOCKET_SECURE defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:28
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:28
info: INFO: Symbol MQTT_MSG_ID_INCREMENTAL defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:36
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:36
info: INFO: Symbol MQTT_SKIP_PUBLISH_IF_DISCONNECTED defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:43
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:43
info: INFO: Symbol MQTT_REPORT_DELETED_MESSAGES defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:53
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:53
info: INFO: Symbol MQTT_USE_CUSTOM_CONFIG defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:60
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:60
info: INFO: Symbol MQTT_TCP_DEFAULT_PORT defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:66
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:66
info: INFO: Symbol MQTT_SSL_DEFAULT_PORT defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:73
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:73
info: INFO: Symbol MQTT_WS_DEFAULT_PORT defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:81
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:81
info: INFO: Symbol MQTT_WSS_DEFAULT_PORT defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:89
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:89
info: INFO: Symbol MQTT_BUFFER_SIZE defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:98
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:98
info: INFO: Symbol MQTT_TASK_STACK_SIZE defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:105
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:105
info: INFO: Symbol MQTT_DISABLE_API_LOCKS defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:112
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:112
info: INFO: Symbol MQTT_TASK_PRIORITY defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:120
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:120
info: INFO: Symbol MQTT_POLL_READ_TIMEOUT_MS defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:127
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:127
info: INFO: Symbol MQTT_EVENT_QUEUE_SIZE defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:134
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:134
info: INFO: Symbol MQTT_TASK_CORE_SELECTION_ENABLED defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:141
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:141
info: INFO: Symbol MQTT_USE_CORE_0 defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:149
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:149
info: INFO: Symbol MQTT_USE_CORE_1 defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:151
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:151
info: INFO: Symbol MQTT_OUTBOX_DATA_ON_EXTERNAL_MEMORY defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:155
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:155
info: INFO: Symbol MQTT_CUSTOM_OUTBOX defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:162
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:162
info: INFO: Symbol MQTT_OUTBOX_EXPIRED_TIMEOUT_MS defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:173
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:173
info: INFO: Choice MQTT_TASK_CORE_SELECTION defined in multiple locations (see below). Please check if this is a correct behavior or a random name match:
C:\Users\Dell\Documents\ESP\Keyboard_lights_2\managed_components\esp_mqtt\Kconfig:146
C:\Espressif\frameworks\v5.4.1\esp-idf\components\mqtt\esp-mqtt\Kconfig:146

View File

@@ -0,0 +1,20 @@
[1/5] C:\Windows\system32\cmd.exe /C "cd /D C:\Users\Dell\Documents\ESP\Keyboard_lights_2\build\esp-idf\esptool_py && C:\Espressif\tools\python_env\idf5.4_py3.11_env\Scripts\python.exe C:/Espressif/frameworks/v5.4.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 partition --type app C:/Users/Dell/Documents/ESP/Keyboard_lights_2/build/partition_table/partition-table.bin C:/Users/Dell/Documents/ESP/Keyboard_lights_2/build/Keyboard_lights_2.bin"
Keyboard_lights_2.bin binary size 0xf28c0 bytes. Smallest app partition is 0x100000 bytes. 0xd740 bytes (5%) free.
[2/5] Performing build step for 'bootloader'
[1/1] C:\Windows\system32\cmd.exe /C "cd /D C:\Users\Dell\Documents\ESP\Keyboard_lights_2\build\bootloader\esp-idf\esptool_py && C:\Espressif\tools\python_env\idf5.4_py3.11_env\Scripts\python.exe C:/Espressif/frameworks/v5.4.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 bootloader 0x0 C:/Users/Dell/Documents/ESP/Keyboard_lights_2/build/bootloader/bootloader.bin"
Bootloader binary size 0x5220 bytes. 0x2de0 bytes (36%) free.
[3/5] No install step for 'bootloader'
[4/5] Completed 'bootloader'
[4/5] C:\Windows\system32\cmd.exe /C "cd /D C:\Espressif\frameworks\v5.4.1\esp-idf\components\esptool_py && C:\Espressif\tools\tools\cmake\3.30.2\bin\cmake.exe -D IDF_PATH=C:/Espressif/frameworks/v5.4.1/esp-idf -D SERIAL_TOOL=C:/Espressif/tools/python_env/idf5.4_py3.11_env/Scripts/python.exe;;C:/Espressif/frameworks/v5.4.1/esp-idf/components/esptool_py/esptool/esptool.py;--chip;esp32s3 -D SERIAL_TOOL_ARGS=--before=default_reset;--after=hard_reset;write_flash;@flash_args -D WORKING_DIRECTORY=C:/Users/Dell/Documents/ESP/Keyboard_lights_2/build -P C:/Espressif/frameworks/v5.4.1/esp-idf/components/esptool_py/run_serial_tool.cmake"
esptool.py --chip esp32s3 -p COM4 -b 460800 --before=default_reset --after=hard_reset write_flash --flash_mode dio --flash_freq 80m --flash_size 2MB 0x0 bootloader/bootloader.bin 0x10000 Keyboard_lights_2.bin 0x8000 partition_table/partition-table.bin
esptool.py v4.8.1
Serial port COM4
A fatal error occurred: Could not open COM4, the port is busy or doesn't exist.
(could not open port 'COM4': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2))
Hint: Check if the port is correct and ESP connected

View File

@@ -0,0 +1,78 @@
[1/5] C:\Windows\system32\cmd.exe /C "cd /D C:\Users\Dell\Documents\ESP\Keyboard_lights_2\build\esp-idf\esptool_py && C:\Espressif\tools\python_env\idf5.4_py3.11_env\Scripts\python.exe C:/Espressif/frameworks/v5.4.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 partition --type app C:/Users/Dell/Documents/ESP/Keyboard_lights_2/build/partition_table/partition-table.bin C:/Users/Dell/Documents/ESP/Keyboard_lights_2/build/Keyboard_lights_2.bin"
Keyboard_lights_2.bin binary size 0xf28b0 bytes. Smallest app partition is 0x100000 bytes. 0xd750 bytes (5%) free.
[2/5] Performing build step for 'bootloader'
[1/1] C:\Windows\system32\cmd.exe /C "cd /D C:\Users\Dell\Documents\ESP\Keyboard_lights_2\build\bootloader\esp-idf\esptool_py && C:\Espressif\tools\python_env\idf5.4_py3.11_env\Scripts\python.exe C:/Espressif/frameworks/v5.4.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 bootloader 0x0 C:/Users/Dell/Documents/ESP/Keyboard_lights_2/build/bootloader/bootloader.bin"
Bootloader binary size 0x5220 bytes. 0x2de0 bytes (36%) free.
[3/5] No install step for 'bootloader'
[4/5] Completed 'bootloader'
[4/5] C:\Windows\system32\cmd.exe /C "cd /D C:\Espressif\frameworks\v5.4.1\esp-idf\components\esptool_py && C:\Espressif\tools\tools\cmake\3.30.2\bin\cmake.exe -D IDF_PATH=C:/Espressif/frameworks/v5.4.1/esp-idf -D SERIAL_TOOL=C:/Espressif/tools/python_env/idf5.4_py3.11_env/Scripts/python.exe;;C:/Espressif/frameworks/v5.4.1/esp-idf/components/esptool_py/esptool/esptool.py;--chip;esp32s3 -D SERIAL_TOOL_ARGS=--before=default_reset;--after=hard_reset;write_flash;@flash_args -D WORKING_DIRECTORY=C:/Users/Dell/Documents/ESP/Keyboard_lights_2/build -P C:/Espressif/frameworks/v5.4.1/esp-idf/components/esptool_py/run_serial_tool.cmake"
esptool.py --chip esp32s3 -p COM4 -b 460800 --before=default_reset --after=hard_reset write_flash --flash_mode dio --flash_freq 80m --flash_size 2MB 0x0 bootloader/bootloader.bin 0x10000 Keyboard_lights_2.bin 0x8000 partition_table/partition-table.bin
esptool.py v4.8.1
Serial port COM4
Connecting....
Chip is ESP32-S3 (QFN56) (revision v0.2)
Features: WiFi, BLE, Embedded PSRAM 8MB (AP_3v3)
Crystal is 40MHz
MAC: 98:a3:16:e2:6c:54
Uploading stub...
Running stub...
Stub running...
Changing baud rate to 460800
Changed.
Configuring flash size...
Flash will be erased from 0x00000000 to 0x00005fff...
Flash will be erased from 0x00010000 to 0x00102fff...
Flash will be erased from 0x00008000 to 0x00008fff...
SHA digest in image updated
Compressed 21024 bytes to 13383...
Writing at 0x00000000... (100 %)
Wrote 21024 bytes (13383 compressed) at 0x00000000 in 0.7 seconds (effective 235.8 kbit/s)...
Hash of data verified.
Compressed 993456 bytes to 611676...
Writing at 0x00010000... (2 %)
Writing at 0x0001d43c... (5 %)
Writing at 0x000297e8... (7 %)
Writing at 0x00032ea5... (10 %)
Writing at 0x0003c792... (13 %)
Writing at 0x00042651... (15 %)
Writing at 0x00048a97... (18 %)
Writing at 0x0004ed5f... (21 %)
Writing at 0x00054de4... (23 %)
Writing at 0x0005b1d8... (26 %)
Writing at 0x00061851... (28 %)
Writing at 0x0006789c... (31 %)
Writing at 0x0006d2ec... (34 %)
Writing at 0x0007304c... (36 %)
Writing at 0x00078f7b... (39 %)
Writing at 0x0007ebd6... (42 %)
Writing at 0x00084700... (44 %)
Writing at 0x0008a3e5... (47 %)
Writing at 0x0009054d... (50 %)
Writing at 0x0009669d... (52 %)
Writing at 0x0009bc4f... (55 %)
Writing at 0x000a0b31... (57 %)
Writing at 0x000a5cdb... (60 %)
Writing at 0x000ab188... (63 %)
Writing at 0x000b02b5... (65 %)
Writing at 0x000b54fa... (68 %)
Writing at 0x000ba96b... (71 %)
Writing at 0x000c071f... (73 %)
Writing at 0x000c60fb... (76 %)
Writing at 0x000cbe85... (78 %)
Writing at 0x000d171d... (81 %)
Writing at 0x000d6e9e... (84 %)
Writing at 0x000dd943... (86 %)
Writing at 0x000e80e6... (89 %)
Writing at 0x000ee610... (92 %)
Writing at 0x000f4d34... (94 %)
Writing at 0x000fb427... (97 %)
Writing at 0x0010041d... (100 %)
Wrote 993456 bytes (611676 compressed) at 0x00010000 in 13.6 seconds (effective 584.3 kbit/s)...
Hash of data verified.
Compressed 3072 bytes to 103...
Writing at 0x00008000... (100 %)
Wrote 3072 bytes (103 compressed) at 0x00008000 in 0.1 seconds (effective 351.0 kbit/s)...

View File

@@ -0,0 +1,46 @@
-- Found Git: C:/Espressif/tools/tools/idf-git/2.39.2/cmd/git.exe (found version "2.39.2.windows.1")
-- ccache will be used for faster recompilation
-- The C compiler identification is GNU 14.2.0
-- The CXX compiler identification is GNU 14.2.0
-- The ASM compiler identification is GNU
-- Found assembler: C:/Espressif/tools/tools/xtensa-esp-elf/esp-14.2.0_20241119/xtensa-esp-elf/bin/xtensa-esp32s3-elf-gcc.exe
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: C:/Espressif/tools/tools/xtensa-esp-elf/esp-14.2.0_20241119/xtensa-esp-elf/bin/xtensa-esp32s3-elf-gcc.exe - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Check for working CXX compiler: C:/Espressif/tools/tools/xtensa-esp-elf/esp-14.2.0_20241119/xtensa-esp-elf/bin/xtensa-esp32s3-elf-g++.exe - skipped
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- Building ESP-IDF components for target esp32s3
NOTICE: Processing 3 dependencies:
NOTICE: [1/3] esp_mqtt (6af4446a48ea7fa54948edc4e62277ed70abb6e1)
NOTICE: [2/3] espressif/usb_host_hid (1.0.3)
NOTICE: [3/3] idf (5.4.1)
-- Project sdkconfig file C:/Users/Dell/Documents/ESP/Keyboard_lights_2/sdkconfig
Loading defaults file C:/Users/Dell/Documents/ESP/Keyboard_lights_2/sdkconfig.defaults...
-- Compiler supported targets: xtensa-esp-elf
-- Found Python3: C:/Espressif/tools/python_env/idf5.4_py3.11_env/Scripts/python.exe (found version "3.11.2") found components: Interpreter
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD - Success
-- Found Threads: TRUE
-- Performing Test C_COMPILER_SUPPORTS_WFORMAT_SIGNEDNESS
-- Performing Test C_COMPILER_SUPPORTS_WFORMAT_SIGNEDNESS - Success
-- App "Keyboard_lights_2" version: 40f8561
-- Adding linker script C:/Users/Dell/Documents/ESP/Keyboard_lights_2/build/esp-idf/esp_system/ld/memory.ld
-- Adding linker script C:/Users/Dell/Documents/ESP/Keyboard_lights_2/build/esp-idf/esp_system/ld/sections.ld.in
-- Adding linker script C:/Espressif/frameworks/v5.4.1/esp-idf/components/esp_rom/esp32s3/ld/esp32s3.rom.ld
-- Adding linker script C:/Espressif/frameworks/v5.4.1/esp-idf/components/esp_rom/esp32s3/ld/esp32s3.rom.api.ld
-- Adding linker script C:/Espressif/frameworks/v5.4.1/esp-idf/components/esp_rom/esp32s3/ld/esp32s3.rom.bt_funcs.ld
-- Adding linker script C:/Espressif/frameworks/v5.4.1/esp-idf/components/esp_rom/esp32s3/ld/esp32s3.rom.libgcc.ld
-- Adding linker script C:/Espressif/frameworks/v5.4.1/esp-idf/components/esp_rom/esp32s3/ld/esp32s3.rom.wdt.ld
-- Adding linker script C:/Espressif/frameworks/v5.4.1/esp-idf/components/esp_rom/esp32s3/ld/esp32s3.rom.version.ld
-- Adding linker script C:/Espressif/frameworks/v5.4.1/esp-idf/components/esp_rom/esp32s3/ld/esp32s3.rom.newlib.ld
-- Adding linker script C:/Espressif/frameworks/v5.4.1/esp-idf/components/soc/esp32s3/ld/esp32s3.peripherals.ld
-- Components: app_update bootloader bootloader_support cxx driver efuse esp-tls esp_app_format esp_bootloader_format esp_coex esp_common esp_driver_ana_cmpr esp_driver_dac esp_driver_gpio esp_driver_gptimer esp_driver_i2c esp_driver_i2s esp_driver_ledc esp_driver_mcpwm esp_driver_parlio esp_driver_pcnt esp_driver_rmt esp_driver_sdio esp_driver_sdm esp_driver_sdmmc esp_driver_sdspi esp_driver_spi esp_driver_tsens esp_driver_uart esp_driver_usb_serial_jtag esp_event esp_hw_support esp_mm esp_mqtt esp_netif esp_netif_stack esp_partition esp_phy esp_pm esp_ringbuf esp_rom esp_security esp_system esp_timer esp_vfs_console esp_wifi espressif__usb_host_hid esptool_py freertos hal heap http_parser log lwip main mbedtls mqtt newlib nvs_flash partition_table pthread sdmmc soc spi_flash tcp_transport usb vfs wpa_supplicant xtensa
-- Component paths: C:/Espressif/frameworks/v5.4.1/esp-idf/components/app_update C:/Espressif/frameworks/v5.4.1/esp-idf/components/bootloader C:/Espressif/frameworks/v5.4.1/esp-idf/components/bootloader_support C:/Espressif/frameworks/v5.4.1/esp-idf/components/cxx C:/Espressif/frameworks/v5.4.1/esp-idf/components/driver C:/Espressif/frameworks/v5.4.1/esp-idf/components/efuse C:/Espressif/frameworks/v5.4.1/esp-idf/components/esp-tls C:/Espressif/frameworks/v5.4.1/esp-idf/components/esp_app_format C:/Espressif/frameworks/v5.4.1/esp-idf/components/esp_bootloader_format C:/Espressif/frameworks/v5.4.1/esp-idf/components/esp_coex C:/Espressif/frameworks/v5.4.1/esp-idf/components/esp_common C:/Espressif/frameworks/v5.4.1/esp-idf/components/esp_driver_ana_cmpr C:/Espressif/frameworks/v5.4.1/esp-idf/components/esp_driver_dac C:/Espressif/frameworks/v5.4.1/esp-idf/components/esp_driver_gpio C:/Espressif/frameworks/v5.4.1/esp-idf/components/esp_driver_gptimer C:/Espressif/frameworks/v5.4.1/esp-idf/components/esp_driver_i2c C:/Espressif/frameworks/v5.4.1/esp-idf/components/esp_driver_i2s C:/Espressif/frameworks/v5.4.1/esp-idf/components/esp_driver_ledc C:/Espressif/frameworks/v5.4.1/esp-idf/components/esp_driver_mcpwm C:/Espressif/frameworks/v5.4.1/esp-idf/components/esp_driver_parlio C:/Espressif/frameworks/v5.4.1/esp-idf/components/esp_driver_pcnt C:/Espressif/frameworks/v5.4.1/esp-idf/components/esp_driver_rmt C:/Espressif/frameworks/v5.4.1/esp-idf/components/esp_driver_sdio C:/Espressif/frameworks/v5.4.1/esp-idf/components/esp_driver_sdm C:/Espressif/frameworks/v5.4.1/esp-idf/components/esp_driver_sdmmc C:/Espressif/frameworks/v5.4.1/esp-idf/components/esp_driver_sdspi C:/Espressif/frameworks/v5.4.1/esp-idf/components/esp_driver_spi C:/Espressif/frameworks/v5.4.1/esp-idf/components/esp_driver_tsens C:/Espressif/frameworks/v5.4.1/esp-idf/components/esp_driver_uart C:/Espressif/frameworks/v5.4.1/esp-idf/components/esp_driver_usb_serial_jtag C:/Espressif/frameworks/v5.4.1/esp-idf/components/esp_event C:/Espressif/frameworks/v5.4.1/esp-idf/components/esp_hw_support C:/Espressif/frameworks/v5.4.1/esp-idf/components/esp_mm C:/Users/Dell/Documents/ESP/Keyboard_lights_2/managed_components/esp_mqtt C:/Espressif/frameworks/v5.4.1/esp-idf/components/esp_netif C:/Espressif/frameworks/v5.4.1/esp-idf/components/esp_netif_stack C:/Espressif/frameworks/v5.4.1/esp-idf/components/esp_partition C:/Espressif/frameworks/v5.4.1/esp-idf/components/esp_phy C:/Espressif/frameworks/v5.4.1/esp-idf/components/esp_pm C:/Espressif/frameworks/v5.4.1/esp-idf/components/esp_ringbuf C:/Espressif/frameworks/v5.4.1/esp-idf/components/esp_rom C:/Espressif/frameworks/v5.4.1/esp-idf/components/esp_security C:/Espressif/frameworks/v5.4.1/esp-idf/components/esp_system C:/Espressif/frameworks/v5.4.1/esp-idf/components/esp_timer C:/Espressif/frameworks/v5.4.1/esp-idf/components/esp_vfs_console C:/Espressif/frameworks/v5.4.1/esp-idf/components/esp_wifi C:/Users/Dell/Documents/ESP/Keyboard_lights_2/managed_components/espressif__usb_host_hid C:/Espressif/frameworks/v5.4.1/esp-idf/components/esptool_py C:/Espressif/frameworks/v5.4.1/esp-idf/components/freertos C:/Espressif/frameworks/v5.4.1/esp-idf/components/hal C:/Espressif/frameworks/v5.4.1/esp-idf/components/heap C:/Espressif/frameworks/v5.4.1/esp-idf/components/http_parser C:/Espressif/frameworks/v5.4.1/esp-idf/components/log C:/Espressif/frameworks/v5.4.1/esp-idf/components/lwip C:/Users/Dell/Documents/ESP/Keyboard_lights_2/main C:/Espressif/frameworks/v5.4.1/esp-idf/components/mbedtls C:/Espressif/frameworks/v5.4.1/esp-idf/components/mqtt C:/Espressif/frameworks/v5.4.1/esp-idf/components/newlib C:/Espressif/frameworks/v5.4.1/esp-idf/components/nvs_flash C:/Espressif/frameworks/v5.4.1/esp-idf/components/partition_table C:/Espressif/frameworks/v5.4.1/esp-idf/components/pthread C:/Espressif/frameworks/v5.4.1/esp-idf/components/sdmmc C:/Espressif/frameworks/v5.4.1/esp-idf/components/soc C:/Espressif/frameworks/v5.4.1/esp-idf/components/spi_flash C:/Espressif/frameworks/v5.4.1/esp-idf/components/tcp_transport C:/Espressif/frameworks/v5.4.1/esp-idf/components/usb C:/Espressif/frameworks/v5.4.1/esp-idf/components/vfs C:/Espressif/frameworks/v5.4.1/esp-idf/components/wpa_supplicant C:/Espressif/frameworks/v5.4.1/esp-idf/components/xtensa
-- Configuring done (17.0s)
-- Generating done (1.4s)
-- Build files have been written to: C:/Users/Dell/Documents/ESP/Keyboard_lights_2/build

View File

@@ -0,0 +1,18 @@
[1/5] C:\Windows\system32\cmd.exe /C "cd /D C:\Users\Dell\Documents\ESP\Keyboard_lights_2\build\esp-idf\esptool_py && C:\Espressif\tools\python_env\idf5.4_py3.11_env\Scripts\python.exe C:/Espressif/frameworks/v5.4.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 partition --type app C:/Users/Dell/Documents/ESP/Keyboard_lights_2/build/partition_table/partition-table.bin C:/Users/Dell/Documents/ESP/Keyboard_lights_2/build/Keyboard_lights_2.bin"
Keyboard_lights_2.bin binary size 0xf28c0 bytes. Smallest app partition is 0x100000 bytes. 0xd740 bytes (5%) free.
[2/5] Performing build step for 'bootloader'
[1/1] C:\Windows\system32\cmd.exe /C "cd /D C:\Users\Dell\Documents\ESP\Keyboard_lights_2\build\bootloader\esp-idf\esptool_py && C:\Espressif\tools\python_env\idf5.4_py3.11_env\Scripts\python.exe C:/Espressif/frameworks/v5.4.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 bootloader 0x0 C:/Users/Dell/Documents/ESP/Keyboard_lights_2/build/bootloader/bootloader.bin"
Bootloader binary size 0x5220 bytes. 0x2de0 bytes (36%) free.
[3/5] No install step for 'bootloader'
[4/5] Completed 'bootloader'
[4/5] C:\Windows\system32\cmd.exe /C "cd /D C:\Espressif\frameworks\v5.4.1\esp-idf\components\esptool_py && C:\Espressif\tools\tools\cmake\3.30.2\bin\cmake.exe -D IDF_PATH=C:/Espressif/frameworks/v5.4.1/esp-idf -D SERIAL_TOOL=C:/Espressif/tools/python_env/idf5.4_py3.11_env/Scripts/python.exe;;C:/Espressif/frameworks/v5.4.1/esp-idf/components/esptool_py/esptool/esptool.py;--chip;esp32s3 -D SERIAL_TOOL_ARGS=--before=default_reset;--after=hard_reset;write_flash;@flash_args -D WORKING_DIRECTORY=C:/Users/Dell/Documents/ESP/Keyboard_lights_2/build -P C:/Espressif/frameworks/v5.4.1/esp-idf/components/esptool_py/run_serial_tool.cmake"
esptool.py --chip esp32s3 -p COM4 -b 460800 --before=default_reset --after=hard_reset write_flash --flash_mode dio --flash_freq 80m --flash_size 2MB 0x0 bootloader/bootloader.bin 0x10000 Keyboard_lights_2.bin 0x8000 partition_table/partition-table.bin
esptool.py v4.8.1
Serial port COM4
Connecting......................................
A fatal error occurred: Failed to connect to ESP32-S3: No serial data received.

File diff suppressed because one or more lines are too long

View File

@@ -0,0 +1,78 @@
[1/5] C:\Windows\system32\cmd.exe /C "cd /D C:\Users\Dell\Documents\ESP\Keyboard_lights_2\build\esp-idf\esptool_py && C:\Espressif\tools\python_env\idf5.4_py3.11_env\Scripts\python.exe C:/Espressif/frameworks/v5.4.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 partition --type app C:/Users/Dell/Documents/ESP/Keyboard_lights_2/build/partition_table/partition-table.bin C:/Users/Dell/Documents/ESP/Keyboard_lights_2/build/Keyboard_lights_2.bin"
Keyboard_lights_2.bin binary size 0xf28c0 bytes. Smallest app partition is 0x100000 bytes. 0xd740 bytes (5%) free.
[2/5] Performing build step for 'bootloader'
[1/1] C:\Windows\system32\cmd.exe /C "cd /D C:\Users\Dell\Documents\ESP\Keyboard_lights_2\build\bootloader\esp-idf\esptool_py && C:\Espressif\tools\python_env\idf5.4_py3.11_env\Scripts\python.exe C:/Espressif/frameworks/v5.4.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 bootloader 0x0 C:/Users/Dell/Documents/ESP/Keyboard_lights_2/build/bootloader/bootloader.bin"
Bootloader binary size 0x5220 bytes. 0x2de0 bytes (36%) free.
[3/5] No install step for 'bootloader'
[4/5] Completed 'bootloader'
[4/5] C:\Windows\system32\cmd.exe /C "cd /D C:\Espressif\frameworks\v5.4.1\esp-idf\components\esptool_py && C:\Espressif\tools\tools\cmake\3.30.2\bin\cmake.exe -D IDF_PATH=C:/Espressif/frameworks/v5.4.1/esp-idf -D SERIAL_TOOL=C:/Espressif/tools/python_env/idf5.4_py3.11_env/Scripts/python.exe;;C:/Espressif/frameworks/v5.4.1/esp-idf/components/esptool_py/esptool/esptool.py;--chip;esp32s3 -D SERIAL_TOOL_ARGS=--before=default_reset;--after=hard_reset;write_flash;@flash_args -D WORKING_DIRECTORY=C:/Users/Dell/Documents/ESP/Keyboard_lights_2/build -P C:/Espressif/frameworks/v5.4.1/esp-idf/components/esptool_py/run_serial_tool.cmake"
esptool.py --chip esp32s3 -p COM20 -b 460800 --before=default_reset --after=hard_reset write_flash --flash_mode dio --flash_freq 80m --flash_size 2MB 0x0 bootloader/bootloader.bin 0x10000 Keyboard_lights_2.bin 0x8000 partition_table/partition-table.bin
esptool.py v4.8.1
Serial port COM20
Connecting....
Chip is ESP32-S3 (QFN56) (revision v0.2)
Features: WiFi, BLE, Embedded PSRAM 8MB (AP_3v3)
Crystal is 40MHz
MAC: 30:ed:a0:1f:0d:d4
Uploading stub...
Running stub...
Stub running...
Changing baud rate to 460800
Changed.
Configuring flash size...
Flash will be erased from 0x00000000 to 0x00005fff...
Flash will be erased from 0x00010000 to 0x00102fff...
Flash will be erased from 0x00008000 to 0x00008fff...
SHA digest in image updated
Compressed 21024 bytes to 13383...
Writing at 0x00000000... (100 %)
Wrote 21024 bytes (13383 compressed) at 0x00000000 in 0.6 seconds (effective 275.0 kbit/s)...
Hash of data verified.
Compressed 993472 bytes to 611687...
Writing at 0x00010000... (2 %)
Writing at 0x0001d434... (5 %)
Writing at 0x000297c5... (7 %)
Writing at 0x00032dc2... (10 %)
Writing at 0x0003c78b... (13 %)
Writing at 0x0004266c... (15 %)
Writing at 0x00048aa3... (18 %)
Writing at 0x0004ed7a... (21 %)
Writing at 0x00054e25... (23 %)
Writing at 0x0005b21f... (26 %)
Writing at 0x000618cf... (28 %)
Writing at 0x000678f7... (31 %)
Writing at 0x0006d31d... (34 %)
Writing at 0x00073077... (36 %)
Writing at 0x00078fa1... (39 %)
Writing at 0x0007ec09... (42 %)
Writing at 0x00084709... (44 %)
Writing at 0x0008a3f9... (47 %)
Writing at 0x00090556... (50 %)
Writing at 0x000966b4... (52 %)
Writing at 0x0009bc57... (55 %)
Writing at 0x000a0b3b... (57 %)
Writing at 0x000a5ce6... (60 %)
Writing at 0x000ab19a... (63 %)
Writing at 0x000b02c5... (65 %)
Writing at 0x000b550f... (68 %)
Writing at 0x000ba97b... (71 %)
Writing at 0x000c0724... (73 %)
Writing at 0x000c6114... (76 %)
Writing at 0x000cbeac... (78 %)
Writing at 0x000d1725... (81 %)
Writing at 0x000d6ea9... (84 %)
Writing at 0x000dd95c... (86 %)
Writing at 0x000e80f6... (89 %)
Writing at 0x000ee616... (92 %)
Writing at 0x000f4d3e... (94 %)
Writing at 0x000fb426... (97 %)
Writing at 0x00100425... (100 %)
Wrote 993472 bytes (611687 compressed) at 0x00010000 in 13.9 seconds (effective 570.2 kbit/s)...
Hash of data verified.
Compressed 3072 bytes to 103...
Writing at 0x00008000... (100 %)
Wrote 3072 bytes (103 compressed) at 0x00008000 in 0.1 seconds (effective 480.6 kbit/s)...

View File

@@ -0,0 +1,617 @@
<EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20>ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0x1 (POWERON),boot:0x8 (SPI_FAST_FLASH_BOOT)
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2810,len:0x15a0
load:0x403c8700,len:0x4
load:0x403c8704,len:0xd20
load:0x403cb700,len:0x2f00
entry 0x403c8928
I (27) boot: ESP-IDF v5.4.1 2nd stage bootloader
I (27) boot: compile time May 21 2025 14:32:48
I (27) boot: Multicore bootloader
I (27) boot: chip revision: v0.2
I (30) boot: efuse block revision: v1.3
I (33) boot.esp32s3: Boot SPI Speed : 80MHz
I (37) boot.esp32s3: SPI Mode : DIO
I (41) boot.esp32s3: SPI Flash Size : 2MB
I (45) boot: Enabling RNG early entropy source...
I (49) boot: Partition Table:
I (52) boot: ## Label Usage Type ST Offset Length
I (58) boot: 0 nvs WiFi data 01 02 00009000 00006000
I (65) boot: 1 phy_init RF data 01 01 0000f000 00001000
I (71) boot: 2 factory factory app 00 00 00010000 00100000
I (78) boot: End of partition table
I (81) esp_image: segment 0: paddr=00010020 vaddr=3c0c0020 size=24aa4h (150180) map
I (115) esp_image: segment 1: paddr=00034acc vaddr=3fc9bb00 size=04a84h ( 19076) load
I (119) esp_image: segment 2: paddr=00039558 vaddr=40374000 size=06ac0h ( 27328) load
I (125) esp_image: segment 3: paddr=00040020 vaddr=42000020 size=b17a4h (726948) map
I (254) esp_image: segment 4: paddr=000f17cc vaddr=4037aac0 size=10f68h ( 69480) load
I (270) esp_image: segment 5: paddr=0010273c vaddr=50000000 size=00018h ( 24) load
I (270) esp_image: segment 6: paddr=0010275c vaddr=600fe000 size=00100h ( 256) load
I (274) esp_image: segment 7: paddr=00102864 vaddr=600fe100 size=00020h ( 32) load
I (290) boot: Loaded app from partition at offset 0x10000
I (291) boot: Disabling RNG early entropy source...
I (303) cpu_start: Multicore app
I (312) cpu_start: Pro cpu start user code
I (312) cpu_start: cpu freq: 160000000 Hz
I (312) app_init: Application information:
I (312) app_init: Project name: Keyboard_lights_2
I (317) app_init: App version: 40f8561
I (321) app_init: Compile time: May 21 2025 14:27:23
I (326) app_init: ELF file SHA256: fe82ff3f6...
I (330) app_init: ESP-IDF: v5.4.1
I (334) efuse_init: Min chip rev: v0.0
I (338) efuse_init: Max chip rev: v0.99 
I (342) efuse_init: Chip rev: v0.2
I (345) heap_init: Initializing. RAM available for dynamic allocation:
I (352) heap_init: At 3FCA4980 len 00044D90 (275 KiB): RAM
I (357) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (362) heap_init: At 3FCF0000 len 00008000 (32 KiB): DRAM
I (367) heap_init: At 600FE120 len 00001EC8 (7 KiB): RTCRAM
I (374) spi_flash: detected chip: generic
I (376) spi_flash: flash io: dio
W (379) spi_flash: Detected size(16384k) larger than the size in the binary image header(2048k). Using the size in the binary image header.
I (392) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (398) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (405) main_task: Started on CPU0
I (425) main_task: Calling app_main()
I (445) hid_mqtt_light: Fresh boot or invalid RTC data. Initializing defaults.
I (445) hid_mqtt_light: Initial/Restored state: Target 0 (sam_bed), Mode Brightness
I (455) hid_mqtt_light: Light 0 (sam_bed): On=0, Bright=5, HueIdx=0
I (455) hid_mqtt_light: Light 1 (jo_bed): On=0, Bright=5, HueIdx=0
I (465) hid_mqtt_light: Light 2 (main_light): On=0, Bright=5, HueIdx=0
I (475) pp: pp rom version: e7ae62f
I (475) net80211: net80211 rom version: e7ae62f
I (485) wifi:wifi driver task: 3fcaf48c, prio:23, stack:6656, core=0
I (495) wifi:wifi firmware version: 79fa3f41ba
I (495) wifi:wifi certification version: v7.0
I (495) wifi:config NVS flash: enabled
I (495) wifi:config nano formatting: disabled
I (505) wifi:Init data frame dynamic rx buffer num: 32
I (505) wifi:Init static rx mgmt buffer num: 5
I (515) wifi:Init management short buffer num: 32
I (515) wifi:Init dynamic tx buffer num: 32
I (515) wifi:Init static tx FG buffer num: 2
I (525) wifi:Init static rx buffer size: 1600
I (525) wifi:Init static rx buffer num: 10
I (535) wifi:Init dynamic rx buffer num: 32
I (535) wifi_init: rx ba win: 6
I (535) wifi_init: accept mbox: 6
I (545) wifi_init: tcpip mbox: 32
I (545) wifi_init: udp mbox: 6
I (545) wifi_init: tcp mbox: 6
I (545) wifi_init: tcp tx win: 5760
I (555) wifi_init: tcp rx win: 5760
I (555) wifi_init: tcp mss: 1440
I (555) wifi_init: WiFi IRAM OP enabled
I (565) wifi_init: WiFi RX IRAM OP enabled
W (565) wifi:Password length matches WPA2 standards, authmode threshold changes from OPEN to WPA2
I (575) phy_init: phy_version 700,8582a7fd,Feb 10 2025,20:13:11
I (615) phy_init: Saving new calibration data due to checksum failure or outdated calibration data, mode(0)
I (645) wifi:mode : sta (98:a3:16:e2:6c:54)
I (645) wifi:enable tsf
I (645) hid_mqtt_light: wifi_init_sta finished. Connecting to AP...
I (645) hid_mqtt_light: WIFI_EVENT_STA_START, connecting...
I (655) hid_mqtt_light: Installing USB Host...
I (655) wifi:new:<6,0>, old:<1,0>, ap:<255,255>, sta:<6,0>, prof:1, snd_ch_cfg:0x0
I (665) wifi:state: init -> auth (0xb0)
I (675) wifi:state: auth -> assoc (0x0)
I (675) wifi:state: assoc -> run (0x10)
I (685) hid_mqtt_light: USB Host installed.
I (685) hid_mqtt_light: Installing HID Host driver...
I (685) hid_mqtt_light: HID Host driver installed.
I (685) hid_mqtt_light: Application started. Waiting for HID Device connection or events...
I (785) wifi:connected with Aussie Broadband 8729, aid = 41, channel 6, BW20, bssid = d0:db:b7:9f:56:a8
I (785) wifi:security: WPA2-PSK, phy: bgn, rssi: -55
I (795) wifi:pm start, type: 1
I (795) wifi:dp: 1, bi: 102400, li: 3, scale listen interval from 307200 us to 307200 us
I (795) wifi:set rx beacon pti, rx_bcn_pti: 0, bcn_timeout: 25000, mt_pti: 0, mt_time: 10000
I (885) wifi:AP's beacon interval = 102400 us, DTIM period = 1
I (995) wifi:<ba-add>idx:0 (ifx:0, d0:db:b7:9f:56:a8), tid:0, ssn:0, winSize:64
I (1065) hid_mqtt_light: HID Device CONNECTED (Driver Event): Protocol 1 Subclass 1
I (1065) hid_mqtt_light: HID device started successfully.
I (1065) hid_mqtt_light: HID Device CONNECTED (Driver Event): Protocol 0 Subclass 0
W (1075) hid_mqtt_light: Keyboard report too short (0 bytes)
W (1075) hid_mqtt_light: Ignoring connected HID device - not a Boot Protocol Keyboard.
I (1085) hid_mqtt_light: HID Device CONNECTED (Driver Event): Protocol 2 Subclass 1
W (1095) hid_mqtt_light: Ignoring connected HID device - not a Boot Protocol Keyboard.
I (14195) hid_mqtt_light: Key pressed: c
I (14195) hid_mqtt_light: Light main_light turned ON.
I (14195) hid_mqtt_light: publish_light_state: WiFi has IP: NO, MQTT Globally Connected: NO
W (14205) hid_mqtt_light: MQTT client not ready or WiFi disconnected. Cannot publish. (g_mqtt_connected: 0, wifi_has_ip: 0)
I (14215) hid_mqtt_light: Current Target: main_light
I (21255) hid_mqtt_light: Key pressed: d
I (21255) hid_mqtt_light: publish_light_state: WiFi has IP: NO, MQTT Globally Connected: NO
W (21255) hid_mqtt_light: MQTT client not ready or WiFi disconnected. Cannot publish. (g_mqtt_connected: 0, wifi_has_ip: 0)
I (21265) hid_mqtt_light: Light 2 (main_light): Brightness 4, Hue Index 0
E (24565) hid-host: Transfer failed, status 1
W (24565) hid_mqtt_light: HID Device, Protocol '1' TRANSFER_ERROR
E (24615) hid-host: hid_host_interface_release_and_free_transfer(604): Unable to release HID Interface
E (24615) hid-host: hid_host_device_close(1213): Unable to release HID Interface
E (24615) hid_mqtt_light: Failed to close device on transfer error: ESP_ERR_INVALID_STATE
I (51255) hid_mqtt_light: Inactivity timeout. Entering deep sleep.
I (51255) wifi:state: run -> init (0x0)
I (51265) wifi:pm stop, total sleep time: 43939688 us / 50469774 us
I (51265) wifi:<ba-del>idx:0, tid:0
I (51265) wifi:new:<6,0>, old:<6,0>, ap:<255,255>, sta:<6,0>, prof:1, snd_ch_cfg:0x0
W (51265) hid_mqtt_light: WiFi disconnected, reason: 8. Trying to reconnect...
I (51305) wifi:flush txq
I (51305) wifi:stop sw txq
I (51305) wifi:lmac stop hw txq
I (51305) wifi:Deinit lldesc rx mblock:10
I (51315) hid_mqtt_light: Preparing for deep sleep.
ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0x1 (POWERON),boot:0x2b (SPI_FAST_FLASH_BOOT)
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2810,len:0x15a0
load:0x403c8700,len:0x4
load:0x403c8704,len:0xd20
load:0x403cb700,len:0x2f00
entry 0x403c8928
I (27) boot: ESP-IDF v5.4.1 2nd stage bootloader
I (27) boot: compile time May 21 2025 14:32:48
I (27) boot: Multicore bootloader
I (27) boot: chip revision: v0.2
I (30) boot: efuse block revision: v1.3
I (34) boot.esp32s3: Boot SPI Speed : 80MHz
I (37) boot.esp32s3: SPI Mode : DIO
I (41) boot.esp32s3: SPI Flash Size : 2MB
I (45) boot: Enabling RNG early entropy source...
I (49) boot: Partition Table:
I (52) boot: ## Label Usage Type ST Offset Length
I (58) boot: 0 nvs WiFi data 01 02 00009000 00006000
I (65) boot: 1 phy_init RF data 01 01 0000f000 00001000
I (71) boot: 2 factory factory app 00 00 00010000 00100000
I (78) boot: End of partition table
I (81) esp_image: segment 0: paddr=00010020 vaddr=3c0c0020 size=24aa4h (150180) map
I (115) esp_image: segment 1: paddr=00034acc vaddr=3fc9bb00 size=04a84h ( 19076) load
I (119) esp_image: segment 2: paddr=00039558 vaddr=40374000 size=06ac0h ( 27328) load
I (125) esp_image: segment 3: paddr=00040020 vaddr=42000020 size=b17a4h (726948) map
I (255) esp_image: segment 4: paddr=000f17cc vaddr=4037aac0 size=10f68h ( 69480) load
I (270) esp_image: segment 5: paddr=0010273c vaddr=50000000 size=00018h ( 24) load
I (270) esp_image: segment 6: paddr=0010275c vaddr=600fe000 size=00100h ( 256) load
I (274) esp_image: segment 7: paddr=00102864 vaddr=600fe100 size=00020h ( 32) load
I (290) boot: Loaded app from partition at offset 0x10000
I (291) boot: Disabling RNG early entropy source...
I (303) cpu_start: Multicore app
I (312) cpu_start: Pro cpu start user code
I (312) cpu_start: cpu freq: 160000000 Hz
I (312) app_init: Application information:
I (312) app_init: Project name: Keyboard_lights_2
I (317) app_init: App version: 40f8561
I (321) app_init: Compile time: May 21 2025 14:27:23
I (326) app_init: ELF file SHA256: fe82ff3f6...
I (330) app_init: ESP-IDF: v5.4.1
I (334) efuse_init: Min chip rev: v0.0
I (338) efuse_init: Max chip rev: v0.99 
I (342) efuse_init: Chip rev: v0.2
I (346) heap_init: Initializing. RAM available for dynamic allocation:
I (352) heap_init: At 3FCA4980 len 00044D90 (275 KiB): RAM
I (357) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (362) heap_init: At 3FCF0000 len 00008000 (32 KiB): DRAM
I (367) heap_init: At 600FE120 len 00001EC8 (7 KiB): RTCRAM
I (374) spi_flash: detected chip: generic
I (376) spi_flash: flash io: dio
W (379) spi_flash: Detected size(16384k) larger than the size in the binary image header(2048k). Using the size in the binary image header.
I (392) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (398) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (405) main_task: Started on CPU0
I (425) main_task: Calling app_main()
I (445) hid_mqtt_light: Fresh boot or invalid RTC data. Initializing defaults.
I (445) hid_mqtt_light: Initial/Restored state: Target 0 (sam_bed), Mode Brightness
I (455) hid_mqtt_light: Light 0 (sam_bed): On=0, Bright=5, HueIdx=0
I (455) hid_mqtt_light: Light 1 (jo_bed): On=0, Bright=5, HueIdx=0
I (465) hid_mqtt_light: Light 2 (main_light): On=0, Bright=5, HueIdx=0
I (475) pp: pp rom version: e7ae62f
I (475) net80211: net80211 rom version: e7ae62f
I (485) wifi:wifi driver task: 3fcaf48c, prio:23, stack:6656, core=0
I (495) wifi:wifi firmware version: 79fa3f41ba
I (495) wifi:wifi certification version: v7.0
I (495) wifi:config NVS flash: enabled
I (495) wifi:config nano formatting: disabled
I (505) wifi:Init data frame dynamic rx buffer num: 32
I (505) wifi:Init static rx mgmt buffer num: 5
I (515) wifi:Init management short buffer num: 32
I (515) wifi:Init dynamic tx buffer num: 32
I (515) wifi:Init static tx FG buffer num: 2
I (525) wifi:Init static rx buffer size: 1600
I (525) wifi:Init static rx buffer num: 10
I (535) wifi:Init dynamic rx buffer num: 32
I (535) wifi_init: rx ba win: 6
I (535) wifi_init: accept mbox: 6
I (545) wifi_init: tcpip mbox: 32
I (545) wifi_init: udp mbox: 6
I (545) wifi_init: tcp mbox: 6
I (545) wifi_init: tcp tx win: 5760
I (555) wifi_init: tcp rx win: 5760
I (555) wifi_init: tcp mss: 1440
I (555) wifi_init: WiFi IRAM OP enabled
I (565) wifi_init: WiFi RX IRAM OP enabled
W (565) wifi:Password length matches WPA2 standards, authmode threshold changes from OPEN to WPA2
I (575) phy_init: phy_version 700,8582a7fd,Feb 10 2025,20:13:11
I (625) phy_init: Saving new calibration data due to checksum failure or outdated calibration data, mode(0)
I (645) wifi:mode : sta (98:a3:16:e2:6c:54)
I (645) wifi:enable tsf
I (645) hid_mqtt_light: wifi_init_sta finished. Connecting to AP...
I (645) hid_mqtt_light: WIFI_EVENT_STA_START, connecting...
I (655) hid_mqtt_light: Installing USB Host...
I (655) wifi:new:<6,0>, old:<1,0>, ap:<255,255>, sta:<6,0>, prof:1, snd_ch_cfg:0x0
I (665) wifi:state: init -> auth (0xb0)
I (675) wifi:state: auth -> assoc (0x0)
I (685) hid_mqtt_light: USB Host installed.
I (685) hid_mqtt_light: Installing HID Host driver...
I (685) hid_mqtt_light: HID Host driver installed.
I (685) hid_mqtt_light: Application started. Waiting for HID Device connection or events...
I (685) wifi:state: assoc -> run (0x10)
I (755) wifi:connected with Aussie Broadband 8729, aid = 17, channel 6, BW20, bssid = d0:db:b7:9f:56:a8
I (755) wifi:security: WPA2-PSK, phy: bgn, rssi: -58
I (765) wifi:pm start, type: 1
I (765) wifi:dp: 1, bi: 102400, li: 3, scale listen interval from 307200 us to 307200 us
I (775) wifi:set rx beacon pti, rx_bcn_pti: 0, bcn_timeout: 25000, mt_pti: 0, mt_time: 10000
I (785) wifi:AP's beacon interval = 102400 us, DTIM period = 1
I (905) wifi:<ba-add>idx:0 (ifx:0, d0:db:b7:9f:56:a8), tid:0, ssn:0, winSize:64
I (1065) hid_mqtt_light: HID Device CONNECTED (Driver Event): Protocol 1 Subclass 1
I (1065) hid_mqtt_light: HID device started successfully.
I (1065) hid_mqtt_light: HID Device CONNECTED (Driver Event): Protocol 0 Subclass 0
I (1075) hid_mqtt_light: Key pressed: d
I (1075) hid_mqtt_light: Light 0 (sam_bed): Brightness 4, Hue Index 0
W (1085) hid_mqtt_light: Ignoring connected HID device - not a Boot Protocol Keyboard.
I (1085) hid_mqtt_light: HID Device CONNECTED (Driver Event): Protocol 2 Subclass 1
W (1095) hid_mqtt_light: Ignoring connected HID device - not a Boot Protocol Keyboard.
I (1935) esp_netif_handlers: sta ip: 192.168.20.45, mask: 255.255.255.0, gw: 192.168.20.1
I (1935) hid_mqtt_light: Got IP:192.168.20.45
I (1935) hid_mqtt_light: Other event id:7
I (2025) hid_mqtt_light: MQTT_EVENT_CONNECTED
E (4315) hid-host: Transfer failed, status 1
W (4315) hid_mqtt_light: HID Device, Protocol '1' TRANSFER_ERROR
E (4365) hid-host: hid_host_interface_release_and_free_transfer(604): Unable to release HID Interface
E (4365) hid-host: hid_host_device_close(1213): Unable to release HID Interface
E (4365) hid_mqtt_light: Failed to close device on transfer error: ESP_ERR_INVALID_STATE
ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0x1 (POWERON),boot:0x2b (SPI_FAST_FLASH_BOOT)
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2810,len:0x15a0
load:0x403c8700,len:0x4
load:0x403c8704,len:0xd20
load:0x403cb700,len:0x2f00
entry 0x403c8928
I (27) boot: ESP-IDF v5.4.1 2nd stage bootloader
I (27) boot: compile time May 21 2025 14:32:48
I (27) boot: Multicore bootloader
I (27) boot: chip revision: v0.2
I (30) boot: efuse block revision: v1.3
I (34) boot.esp32s3: Boot SPI Speed : 80MHz
I (37) boot.esp32s3: SPI Mode : DIO
I (41) boot.esp32s3: SPI Flash Size : 2MB
I (45) boot: Enabling RNG early entropy source...
I (49) boot: Partition Table:
I (52) boot: ## Label Usage Type ST Offset Length
I (58) boot: 0 nvs WiFi data 01 02 00009000 00006000
I (65) boot: 1 phy_init RF data 01 01 0000f000 00001000
I (71) boot: 2 factory factory app 00 00 00010000 00100000
I (78) boot: End of partition table
I (81) esp_image: segment 0: paddr=00010020 vaddr=3c0c0020 size=24aa4h (150180) map
I (115) esp_image: segment 1: paddr=00034acc vaddr=3fc9bb00 size=04a84h ( 19076) load
I (119) esp_image: segment 2: paddr=00039558 vaddr=40374000 size=06ac0h ( 27328) load
I (125) esp_image: segment 3: paddr=00040020 vaddr=42000020 size=b17a4h (726948) map
I (255) esp_image: segment 4: paddr=000f17cc vaddr=4037aac0 size=10f68h ( 69480) load
I (270) esp_image: segment 5: paddr=0010273c vaddr=50000000 size=00018h ( 24) load
I (270) esp_image: segment 6: paddr=0010275c vaddr=600fe000 size=00100h ( 256) load
I (274) esp_image: segment 7: paddr=00102864 vaddr=600fe100 size=00020h ( 32) load
I (290) boot: Loaded app from partition at offset 0x10000
I (291) boot: Disabling RNG early entropy source...
I (303) cpu_start: Multicore app
I (312) cpu_start: Pro cpu start user code
I (312) cpu_start: cpu freq: 160000000 Hz
I (312) app_init: Application information:
I (312) app_init: Project name: Keyboard_lights_2
I (317) app_init: App version: 40f8561
I (321) app_init: Compile time: May 21 2025 14:27:23
I (326) app_init: ELF file SHA256: fe82ff3f6...
I (330) app_init: ESP-IDF: v5.4.1
I (334) efuse_init: Min chip rev: v0.0
I (338) efuse_init: Max chip rev: v0.99 
I (342) efuse_init: Chip rev: v0.2
I (346) heap_init: Initializing. RAM available for dynamic allocation:
I (352) heap_init: At 3FCA4980 len 00044D90 (275 KiB): RAM
I (357) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (362) heap_init: At 3FCF0000 len 00008000 (32 KiB): DRAM
I (367) heap_init: At 600FE120 len 00001EC8 (7 KiB): RTCRAM
I (374) spi_flash: detected chip: generic
I (376) spi_flash: flash io: dio
W (379) spi_flash: Detected size(16384k) larger than the size in the binary image header(2048k). Using the size in the binary image header.
I (392) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (398) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (405) main_task: Started on CPU0
I (425) main_task: Calling app_main()
I (445) hid_mqtt_light: Fresh boot or invalid RTC data. Initializing defaults.
I (445) hid_mqtt_light: Initial/Restored state: Target 0 (sam_bed), Mode Brightness
I (455) hid_mqtt_light: Light 0 (sam_bed): On=0, Bright=5, HueIdx=0
I (455) hid_mqtt_light: Light 1 (jo_bed): On=0, Bright=5, HueIdx=0
I (465) hid_mqtt_light: Light 2 (main_light): On=0, Bright=5, HueIdx=0
I (475) pp: pp rom version: e7ae62f
I (475) net80211: net80211 rom version: e7ae62f
I (485) wifi:wifi driver task: 3fcaf510, prio:23, stack:6656, core=0
I (495) wifi:wifi firmware version: 79fa3f41ba
I (495) wifi:wifi certification version: v7.0
I (495) wifi:config NVS flash: enabled
I (495) wifi:config nano formatting: disabled
I (505) wifi:Init data frame dynamic rx buffer num: 32
I (505) wifi:Init static rx mgmt buffer num: 5
I (515) wifi:Init management short buffer num: 32
I (515) wifi:Init dynamic tx buffer num: 32
I (515) wifi:Init static tx FG buffer num: 2
I (525) wifi:Init static rx buffer size: 1600
I (525) wifi:Init static rx buffer num: 10
I (535) wifi:Init dynamic rx buffer num: 32
I (535) wifi_init: rx ba win: 6
I (535) wifi_init: accept mbox: 6
I (545) wifi_init: tcpip mbox: 32
I (545) wifi_init: udp mbox: 6
I (545) wifi_init: tcp mbox: 6
I (545) wifi_init: tcp tx win: 5760
I (555) wifi_init: tcp rx win: 5760
I (555) wifi_init: tcp mss: 1440
I (555) wifi_init: WiFi IRAM OP enabled
I (565) wifi_init: WiFi RX IRAM OP enabled
W (565) wifi:Password length matches WPA2 standards, authmode threshold changes from OPEN to WPA2
I (575) phy_init: phy_version 700,8582a7fd,Feb 10 2025,20:13:11
I (625) phy_init: Saving new calibration data due to checksum failure or outdated calibration data, mode(0)
I (645) wifi:mode : sta (98:a3:16:e2:6c:54)
I (645) wifi:enable tsf
I (645) hid_mqtt_light: wifi_init_sta finished. Connecting to AP...
I (645) hid_mqtt_light: WIFI_EVENT_STA_START, connecting...
I (655) hid_mqtt_light: Installing USB Host...
I (655) wifi:new:<6,0>, old:<1,0>, ap:<255,255>, sta:<6,0>, prof:1, snd_ch_cfg:0x0
I (665) wifi:state: init -> auth (0xb0)
I (675) wifi:state: auth -> assoc (0x0)
I (685) hid_mqtt_light: USB Host installed.
I (685) hid_mqtt_light: Installing HID Host driver...
I (685) hid_mqtt_light: HID Host driver installed.
I (685) hid_mqtt_light: Application started. Waiting for HID Device connection or events...
I (685) wifi:state: assoc -> run (0x10)
I (725) wifi:state: run -> init (0x2c0)
I (745) wifi:new:<6,0>, old:<6,0>, ap:<255,255>, sta:<6,0>, prof:1, snd_ch_cfg:0x0
W (745) hid_mqtt_light: WiFi disconnected, reason: 2. Trying to reconnect...
I (1065) hid_mqtt_light: HID Device CONNECTED (Driver Event): Protocol 1 Subclass 1
I (1065) hid_mqtt_light: HID device started successfully.
I (1065) hid_mqtt_light: HID Device CONNECTED (Driver Event): Protocol 0 Subclass 0
I (1075) hid_mqtt_light: Key pressed: c
I (1075) hid_mqtt_light: Light main_light turned ON.
I (1075) hid_mqtt_light: publish_light_state: WiFi has IP: NO, MQTT Globally Connected: NO
W (1085) hid_mqtt_light: MQTT client not ready or WiFi disconnected. Cannot publish. (g_mqtt_connected: 0, wifi_has_ip: 0)
I (1095) hid_mqtt_light: Current Target: main_light
W (1105) hid_mqtt_light: Ignoring connected HID device - not a Boot Protocol Keyboard.
I (1115) hid_mqtt_light: HID Device CONNECTED (Driver Event): Protocol 2 Subclass 1
W (1115) hid_mqtt_light: Ignoring connected HID device - not a Boot Protocol Keyboard.
W (3155) hid_mqtt_light: WiFi disconnected, reason: 205. Trying to reconnect...
I (3235) wifi:new:<6,0>, old:<6,0>, ap:<255,255>, sta:<6,0>, prof:1, snd_ch_cfg:0x0
I (3245) wifi:state: init -> auth (0xb0)
I (3275) wifi:state: auth -> assoc (0x0)
I (3295) wifi:state: assoc -> run (0x10)
I (3335) wifi:connected with Aussie Broadband 8729, aid = 49, channel 6, BW20, bssid = d0:db:b7:9f:56:a8
I (3335) wifi:security: WPA2-PSK, phy: bgn, rssi: -75
I (3345) wifi:pm start, type: 1
I (3345) wifi:dp: 1, bi: 102400, li: 3, scale listen interval from 307200 us to 307200 us
I (3355) wifi:set rx beacon pti, rx_bcn_pti: 0, bcn_timeout: 25000, mt_pti: 0, mt_time: 10000
I (3355) wifi:AP's beacon interval = 102400 us, DTIM period = 1
I (3395) wifi:<ba-add>idx:0 (ifx:0, d0:db:b7:9f:56:a8), tid:0, ssn:0, winSize:64
I (4415) esp_netif_handlers: sta ip: 192.168.20.45, mask: 255.255.255.0, gw: 192.168.20.1
I (4415) hid_mqtt_light: Got IP:192.168.20.45
I (4415) hid_mqtt_light: Other event id:7
I (4445) hid_mqtt_light: MQTT_EVENT_CONNECTED
I (7505) hid_mqtt_light: Key pressed: c
I (7505) hid_mqtt_light: Light main_light turned OFF.
I (7505) hid_mqtt_light: publish_light_state: WiFi has IP: YES, MQTT Globally Connected: YES
I (7505) hid_mqtt_light: Publishing to homeassistant/light/main_light/set: {"state":"OFF"}
I (7515) hid_mqtt_light: Current Target: main_light
I (7525) hid_mqtt_light: MQTT_EVENT_PUBLISHED, msg_id=47515
I (14795) hid_mqtt_light: Key pressed: c
I (14795) hid_mqtt_light: Light main_light turned ON.
I (14795) hid_mqtt_light: publish_light_state: WiFi has IP: YES, MQTT Globally Connected: YES
I (14795) hid_mqtt_light: Publishing to homeassistant/light/main_light/set: {"state":"ON","brightness":128,"color_temp":2200,"xy_color":[0.53032141923904419,0.41342452168464661]}
I (14815) hid_mqtt_light: Current Target: main_light
I (14825) hid_mqtt_light: MQTT_EVENT_PUBLISHED, msg_id=55872
E (23965) hid-host: Transfer failed, status 1
W (23965) hid_mqtt_light: HID Device, Protocol '1' TRANSFER_ERROR
E (24015) hid-host: hid_host_interface_release_and_free_transfer(604): Unable to release HID Interface
E (24015) hid-host: hid_host_device_close(1213): Unable to release HID Interface
E (24015) hid_mqtt_light: Failed to close device on transfer error: ESP_ERR_INVALID_STATE
I (44795) hid_mqtt_light: Inactivity timeout. Entering deep sleep.
I (44795) mqtt_client: Client asked to disconnect
I (44795) wifi:state: run -> init (0x0)
I (44805) wifi:pm stop, total sleep time: 35720911 us / 41458382 us
I (44805) wifi:<ba-del>idx:0, tid:0
I (44805) wifi:new:<6,0>, old:<6,0>, ap:<255,255>, sta:<6,0>, prof:1, snd_ch_cfg:0x0
W (44815) hid_mqtt_light: WiFi disconnected, reason: 8. Trying to reconnect...
I (44845) wifi:flush txq
I (44845) wifi:stop sw txq
I (44845) wifi:lmac stop hw txq
I (44845) wifi:Deinit lldesc rx mblock:10
I (44855) hid_mqtt_light: Preparing for deep sleep.
ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0x1 (POWERON),boot:0x8 (SPI_FAST_FLASH_BOOT)
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2810,len:0x15a0
load:0x403c8700,len:0x4
load:0x403c8704,len:0xd20
load:0x403cb700,len:0x2f00
entry 0x403c8928
I (27) boot: ESP-IDF v5.4.1 2nd stage bootloader
I (27) boot: compile time May 21 2025 14:32:48
I (27) boot: Multicore bootloader
I (27) boot: chip revision: v0.2
I (30) boot: efuse block revision: v1.3
I (33) boot.esp32s3: Boot SPI Speed : 80MHz
I (37) boot.esp32s3: SPI Mode : DIO
I (41) boot.esp32s3: SPI Flash Size : 2MB
I (45) boot: Enabling RNG early entropy source...
I (49) boot: Partition Table:
I (52) boot: ## Label Usage Type ST Offset Length
I (58) boot: 0 nvs WiFi data 01 02 00009000 00006000
I (65) boot: 1 phy_init RF data 01 01 0000f000 00001000
I (71) boot: 2 factory factory app 00 00 00010000 00100000
I (78) boot: End of partition table
I (81) esp_image: segment 0: paddr=00010020 vaddr=3c0c0020 size=24aa4h (150180) map
I (115) esp_image: segment 1: paddr=00034acc vaddr=3fc9bb00 size=04a84h ( 19076) load
I (119) esp_image: segment 2: paddr=00039558 vaddr=40374000 size=06ac0h ( 27328) load
I (125) esp_image: segment 3: paddr=00040020 vaddr=42000020 size=b17a4h (726948) map
I (254) esp_image: segment 4: paddr=000f17cc vaddr=4037aac0 size=10f68h ( 69480) load
I (270) esp_image: segment 5: paddr=0010273c vaddr=50000000 size=00018h ( 24) load
I (270) esp_image: segment 6: paddr=0010275c vaddr=600fe000 size=00100h ( 256) load
I (274) esp_image: segment 7: paddr=00102864 vaddr=600fe100 size=00020h ( 32) load
I (290) boot: Loaded app from partition at offset 0x10000
I (291) boot: Disabling RNG early entropy source...
I (303) cpu_start: Multicore app
I (312) cpu_start: Pro cpu start user code
I (312) cpu_start: cpu freq: 160000000 Hz
I (312) app_init: Application information:
I (312) app_init: Project name: Keyboard_lights_2
I (317) app_init: App version: 40f8561
I (321) app_init: Compile time: May 21 2025 14:27:23
I (326) app_init: ELF file SHA256: fe82ff3f6...
I (330) app_init: ESP-IDF: v5.4.1
I (334) efuse_init: Min chip rev: v0.0
I (338) efuse_init: Max chip rev: v0.99 
I (342) efuse_init: Chip rev: v0.2
I (345) heap_init: Initializing. RAM available for dynamic allocation:
I (352) heap_init: At 3FCA4980 len 00044D90 (275 KiB): RAM
I (357) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (362) heap_init: At 3FCF0000 len 00008000 (32 KiB): DRAM
I (367) heap_init: At 600FE120 len 00001EC8 (7 KiB): RTCRAM
I (374) spi_flash: detected chip: generic
I (376) spi_flash: flash io: dio
W (379) spi_flash: Detected size(16384k) larger than the size in the binary image header(2048k). Using the size in the binary image header.
I (392) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (398) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (405) main_task: Started on CPU0
I (425) main_task: Calling app_main()
I (445) hid_mqtt_light: Fresh boot or invalid RTC data. Initializing defaults.
I (445) hid_mqtt_light: Initial/Restored state: Target 0 (sam_bed), Mode Brightness
I (455) hid_mqtt_light: Light 0 (sam_bed): On=0, Bright=5, HueIdx=0
I (455) hid_mqtt_light: Light 1 (jo_bed): On=0, Bright=5, HueIdx=0
I (465) hid_mqtt_light: Light 2 (main_light): On=0, Bright=5, HueIdx=0
I (475) pp: pp rom version: e7ae62f
I (475) net80211: net80211 rom version: e7ae62f
I (485) wifi:wifi driver task: 3fcaf510, prio:23, stack:6656, core=0
I (495) wifi:wifi firmware version: 79fa3f41ba
I (495) wifi:wifi certification version: v7.0
I (495) wifi:config NVS flash: enabled
I (495) wifi:config nano formatting: disabled
I (505) wifi:Init data frame dynamic rx buffer num: 32
I (505) wifi:Init static rx mgmt buffer num: 5
I (505) wifi:Init management short buffer num: 32
I (515) wifi:Init dynamic tx buffer num: 32
I (515) wifi:Init static tx FG buffer num: 2
I (525) wifi:Init static rx buffer size: 1600
I (525) wifi:Init static rx buffer num: 10
I (525) wifi:Init dynamic rx buffer num: 32
I (535) wifi_init: rx ba win: 6
I (535) wifi_init: accept mbox: 6
I (535) wifi_init: tcpip mbox: 32
I (545) wifi_init: udp mbox: 6
I (545) wifi_init: tcp mbox: 6
I (545) wifi_init: tcp tx win: 5760
I (555) wifi_init: tcp rx win: 5760
I (555) wifi_init: tcp mss: 1440
I (555) wifi_init: WiFi IRAM OP enabled
I (565) wifi_init: WiFi RX IRAM OP enabled
W (565) wifi:Password length matches WPA2 standards, authmode threshold changes from OPEN to WPA2
I (575) phy_init: phy_version 700,8582a7fd,Feb 10 2025,20:13:11
I (625) phy_init: Saving new calibration data due to checksum failure or outdated calibration data, mode(0)
I (785) wifi:mode : sta (98:a3:16:e2:6c:54)
I (785) wifi:enable tsf
I (785) hid_mqtt_light: wifi_init_sta finished. Connecting to AP...
I (785) hid_mqtt_light: WIFI_EVENT_STA_START, connecting...
I (785) hid_mqtt_light: Installing USB Host...
I (795) wifi:new:<6,0>, old:<1,0>, ap:<255,255>, sta:<6,0>, prof:1, snd_ch_cfg:0x0
I (795) wifi:state: init -> auth (0xb0)
I (815) wifi:state: auth -> assoc (0x0)
I (815) wifi:state: assoc -> run (0x10)
I (825) hid_mqtt_light: USB Host installed.
I (825) hid_mqtt_light: Installing HID Host driver...
I (825) hid_mqtt_light: HID Host driver installed.
I (825) hid_mqtt_light: Application started. Waiting for HID Device connection or events...
I (875) wifi:connected with Aussie Broadband 8729, aid = 53, channel 6, BW20, bssid = d0:db:b7:9f:56:a8
I (875) wifi:security: WPA2-PSK, phy: bgn, rssi: -52
I (875) wifi:pm start, type: 1
I (875) wifi:dp: 1, bi: 102400, li: 3, scale listen interval from 307200 us to 307200 us
I (885) wifi:set rx beacon pti, rx_bcn_pti: 0, bcn_timeout: 25000, mt_pti: 0, mt_time: 10000
I (895) wifi:AP's beacon interval = 102400 us, DTIM period = 1
I (915) wifi:<ba-add>idx:0 (ifx:0, d0:db:b7:9f:56:a8), tid:0, ssn:0, winSize:64
I (1205) hid_mqtt_light: HID Device CONNECTED (Driver Event): Protocol 1 Subclass 1
I (1205) hid_mqtt_light: HID device started successfully.
I (1205) hid_mqtt_light: HID Device CONNECTED (Driver Event): Protocol 0 Subclass 0
W (1215) hid_mqtt_light: Keyboard report too short (0 bytes)
W (1215) hid_mqtt_light: Ignoring connected HID device - not a Boot Protocol Keyboard.
I (1225) hid_mqtt_light: HID Device CONNECTED (Driver Event): Protocol 2 Subclass 1
W (1235) hid_mqtt_light: Ignoring connected HID device - not a Boot Protocol Keyboard.
I (1945) esp_netif_handlers: sta ip: 192.168.20.45, mask: 255.255.255.0, gw: 192.168.20.1
I (1945) hid_mqtt_light: Got IP:192.168.20.45
I (1945) hid_mqtt_light: Other event id:7
I (1975) hid_mqtt_light: MQTT_EVENT_CONNECTED
I (4995) hid_mqtt_light: Key pressed: c
I (4995) hid_mqtt_light: Light main_light turned ON.
I (4995) hid_mqtt_light: publish_light_state: WiFi has IP: YES, MQTT Globally Connected: YES
I (5005) hid_mqtt_light: Publishing to homeassistant/light/main_light/set: {"state":"ON","brightness":128,"color_temp":2200,"xy_color":[0.53032141923904419,0.41342452168464661]}
I (5015) hid_mqtt_light: Current Target: main_light
I (5035) hid_mqtt_light: MQTT_EVENT_PUBLISHED, msg_id=18569
I (14855) hid_mqtt_light: Key pressed: c
I (14855) hid_mqtt_light: Light main_light turned OFF.
I (14855) hid_mqtt_light: publish_light_state: WiFi has IP: YES, MQTT Globally Connected: YES
I (14865) hid_mqtt_light: Publishing to homeassistant/light/main_light/set: {"state":"OFF"}
I (14875) hid_mqtt_light: Current Target: main_light
I (14885) hid_mqtt_light: MQTT_EVENT_PUBLISHED, msg_id=17355
I (17615) hid_mqtt_light: Key pressed: c
I (17615) hid_mqtt_light: Light main_light turned ON.
I (17615) hid_mqtt_light: publish_light_state: WiFi has IP: YES, MQTT Globally Connected: YES
I (17615) hid_mqtt_light: Publishing to homeassistant/light/main_light/set: {"state":"ON","brightness":128,"color_temp":2200,"xy_color":[0.53032141923904419,0.41342452168464661]}
I (17635) hid_mqtt_light: Current Target: main_light
I (17645) hid_mqtt_light: MQTT_EVENT_PUBLISHED, msg_id=21313
E (20195) hid-host: Transfer failed, status 1
W (20195) hid_mqtt_light: HID Device, Protocol '1' TRANSFER_ERROR
E (20245) hid-host: hid_host_interface_release_and_free_transfer(604): Unable to release HID Interface
E (20245) hid-host: hid_host_device_close(1213): Unable to release HID Interface
E (20245) hid_mqtt_light: Failed to close device on transfer error: ESP_ERR_INVALID_STATE
I (47615) hid_mqtt_light: Inactivity timeout. Entering deep sleep.
I (47615) mqtt_client: Client asked to disconnect
I (47625) wifi:state: run -> init (0x0)
I (47635) wifi:pm stop, total sleep time: 38052296 us / 46753454 us
I (47635) wifi:<ba-del>idx:0, tid:0
I (47635) wifi:new:<6,0>, old:<6,0>, ap:<255,255>, sta:<6,0>, prof:1, snd_ch_cfg:0x0
W (47635) hid_mqtt_light: WiFi disconnected, reason: 8. Trying to reconnect...
I (47765) wifi:flush txq
I (47765) wifi:stop sw txq
I (47765) wifi:lmac stop hw txq
I (47765) wifi:Deinit lldesc rx mblock:10
I (47775) hid_mqtt_light: Preparing for deep sleep.
ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0x1 (POWERON),boot:0x8 (SPI_FAST_FLASH_BOOT)
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2810,len:0x15a0
load:0x403c8700,len:0x4
load:0x403c8704,len:0xd20
load:0x403cb700,len:0x2f00
entry 0x403c8928
I (27) boot: ESP-IDF v5.4.1 2nd stage bootloader
I (27) boot: compile time May 21 2025 14:32:48
I (27) boot: Multicore bootloader
I (27) boot: chip revision: v0.2
I (30) boot: efuse bl

View File

View File

@@ -0,0 +1,887 @@
"<22>ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0x1 (POWERON),boot:0x8 (SPI_FAST_FLASH_BOOT)
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2810,len:0x15a0
load:0x403c8700,len:0x4
load:0x403c8704,len:0xd20
load:0x403cb700,len:0x2f00
entry 0x403c8928
I (27) boot: ESP-IDF v5.4.1 2nd stage bootloader
I (27) boot: compile time May 21 2025 14:32:48
I (27) boot: Multicore bootloader
I (27) boot: chip revision: v0.2
I (30) boot: efuse block revision: v1.3
I (33) boot.esp32s3: Boot SPI Speed : 80MHz
I (37) boot.esp32s3: SPI Mode : DIO
I (41) boot.esp32s3: SPI Flash Size : 2MB
I (45) boot: Enabling RNG early entropy source...
I (49) boot: Partition Table:
I (52) boot: ## Label Usage Type ST Offset Length
I (58) boot: 0 nvs WiFi data 01 02 00009000 00006000
I (65) boot: 1 phy_init RF data 01 01 0000f000 00001000
I (71) boot: 2 factory factory app 00 00 00010000 00100000
I (78) boot: End of partition table
I (81) esp_image: segment 0: paddr=00010020 vaddr=3c0c0020 size=24ad4h (150228) map
I (115) esp_image: segment 1: paddr=00034afc vaddr=3fc9bb00 size=04a84h ( 19076) load
I (119) esp_image: segment 2: paddr=00039588 vaddr=40374000 size=06a90h ( 27280) load
I (125) esp_image: segment 3: paddr=00040020 vaddr=42000020 size=b1788h (726920) map
I (254) esp_image: segment 4: paddr=000f17b0 vaddr=4037aa90 size=10f98h ( 69528) load
I (270) esp_image: segment 5: paddr=00102750 vaddr=50000000 size=00018h ( 24) load
I (270) esp_image: segment 6: paddr=00102770 vaddr=600fe000 size=00100h ( 256) load
I (274) esp_image: segment 7: paddr=00102878 vaddr=600fe100 size=00020h ( 32) load
I (290) boot: Loaded app from partition at offset 0x10000
I (291) boot: Disabling RNG early entropy source...
I (303) cpu_start: Multicore app
I (312) cpu_start: Pro cpu start user code
I (312) cpu_start: cpu freq: 160000000 Hz
I (312) app_init: Application information:
I (312) app_init: Project name: Keyboard_lights_2
I (317) app_init: App version: 40f8561
I (321) app_init: Compile time: May 21 2025 14:27:23
I (326) app_init: ELF file SHA256: 514a8f0c1...
I (330) app_init: ESP-IDF: v5.4.1
I (334) efuse_init: Min chip rev: v0.0
I (338) efuse_init: Max chip rev: v0.99 
I (342) efuse_init: Chip rev: v0.2
I (345) heap_init: Initializing. RAM available for dynamic allocation:
I (352) heap_init: At 3FCA4980 len 00044D90 (275 KiB): RAM
I (357) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (362) heap_init: At 3FCF0000 len 00008000 (32 KiB): DRAM
I (367) heap_init: At 600FE120 len 00001EC8 (7 KiB): RTCRAM
I (374) spi_flash: detected chip: generic
I (376) spi_flash: flash io: dio
W (379) spi_flash: Detected size(16384k) larger than the size in the binary image header(2048k). Using the size in the binary image header.
I (392) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (398) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (405) main_task: Started on CPU0
I (425) main_task: Calling app_main()
I (445) hid_mqtt_light: Fresh boot or invalid RTC data. Initializing defaults.
I (445) hid_mqtt_light: Initial/Restored state: Target 0 (sams_bed_lamp), Mode Brightness
I (455) hid_mqtt_light: Light 0 (sams_bed_lamp): On=0, Bright=5, HueIdx=0
I (455) hid_mqtt_light: Light 1 (joanna_red_reading_light_light): On=0, Bright=5, HueIdx=0
I (465) hid_mqtt_light: Light 2 (bed_sam_jo_chandelier_1): On=0, Bright=5, HueIdx=0
I (475) pp: pp rom version: e7ae62f
I (475) net80211: net80211 rom version: e7ae62f
I (495) wifi:wifi driver task: 3fcaf48c, prio:23, stack:6656, core=0
I (505) wifi:wifi firmware version: 79fa3f41ba
I (505) wifi:wifi certification version: v7.0
I (505) wifi:config NVS flash: enabled
I (505) wifi:config nano formatting: disabled
I (505) wifi:Init data frame dynamic rx buffer num: 32
I (515) wifi:Init static rx mgmt buffer num: 5
I (515) wifi:Init management short buffer num: 32
I (525) wifi:Init dynamic tx buffer num: 32
I (525) wifi:Init static tx FG buffer num: 2
I (535) wifi:Init static rx buffer size: 1600
I (535) wifi:Init static rx buffer num: 10
I (535) wifi:Init dynamic rx buffer num: 32
I (545) wifi_init: rx ba win: 6
I (545) wifi_init: accept mbox: 6
I (545) wifi_init: tcpip mbox: 32
I (555) wifi_init: udp mbox: 6
I (555) wifi_init: tcp mbox: 6
I (555) wifi_init: tcp tx win: 5760
I (555) wifi_init: tcp rx win: 5760
I (565) wifi_init: tcp mss: 1440
I (565) wifi_init: WiFi IRAM OP enabled
I (565) wifi_init: WiFi RX IRAM OP enabled
W (575) wifi:Password length matches WPA2 standards, authmode threshold changes from OPEN to WPA2
I (585) phy_init: phy_version 700,8582a7fd,Feb 10 2025,20:13:11
I (635) phy_init: Saving new calibration data due to checksum failure or outdated calibration data, mode(0)
I (715) wifi:mode : sta (98:a3:16:e2:6c:54)
I (715) wifi:enable tsf
I (715) hid_mqtt_light: wifi_init_sta finished. Connecting to AP...
I (715) hid_mqtt_light: WIFI_EVENT_STA_START, connecting...
I (725) hid_mqtt_light: Installing USB Host...
I (735) wifi:new:<6,0>, old:<1,0>, ap:<255,255>, sta:<6,0>, prof:1, snd_ch_cfg:0x0
I (735) wifi:state: init -> auth (0xb0)
I (745) wifi:state: auth -> assoc (0x0)
I (755) hid_mqtt_light: USB Host installed.
I (755) hid_mqtt_light: Installing HID Host driver...
I (755) wifi:state: assoc -> run (0x10)
I (755) hid_mqtt_light: HID Host driver installed.
I (755) hid_mqtt_light: Application started. Waiting for HID Device connection or events...
I (845) wifi:connected with Aussie Broadband 8729, aid = 52, channel 6, BW20, bssid = d0:db:b7:9f:56:a8
I (845) wifi:security: WPA2-PSK, phy: bgn, rssi: -57
I (855) wifi:pm start, type: 1
I (855) wifi:dp: 1, bi: 102400, li: 3, scale listen interval from 307200 us to 307200 us
I (865) wifi:set rx beacon pti, rx_bcn_pti: 0, bcn_timeout: 25000, mt_pti: 0, mt_time: 10000
I (885) wifi:<ba-add>idx:0 (ifx:0, d0:db:b7:9f:56:a8), tid:0, ssn:0, winSize:64
I (925) wifi:AP's beacon interval = 102400 us, DTIM period = 1
I (1135) hid_mqtt_light: HID Device CONNECTED (Driver Event): Protocol 1 Subclass 1
I (1135) hid_mqtt_light: HID device started successfully.
I (1135) hid_mqtt_light: HID Device CONNECTED (Driver Event): Protocol 0 Subclass 0
W (1145) hid_mqtt_light: Keyboard report too short (0 bytes)
W (1145) hid_mqtt_light: Ignoring connected HID device - not a Boot Protocol Keyboard.
I (1155) hid_mqtt_light: HID Device CONNECTED (Driver Event): Protocol 2 Subclass 1
W (1165) hid_mqtt_light: Ignoring connected HID device - not a Boot Protocol Keyboard.
I (1925) esp_netif_handlers: sta ip: 192.168.20.45, mask: 255.255.255.0, gw: 192.168.20.1
I (1925) hid_mqtt_light: Got IP:192.168.20.45
I (1925) hid_mqtt_light: Other event id:7
I (1965) hid_mqtt_light: MQTT_EVENT_CONNECTED
E (11375) hid-host: Transfer failed, status 1
W (11375) hid_mqtt_light: HID Device, Protocol '1' TRANSFER_ERROR
E (11425) hid-host: hid_host_interface_release_and_free_transfer(604): Unable to release HID Interface
E (11425) hid-host: hid_host_device_close(1213): Unable to release HID Interface
E (11425) hid_mqtt_light: Failed to close device on transfer error: ESP_ERR_INVALID_STATE
I (31965) hid_mqtt_light: Inactivity timeout. Entering deep sleep.
I (31965) mqtt_client: Client asked to disconnect
I (31975) wifi:state: run -> init (0x0)
I (31985) wifi:pm stop, total sleep time: 24327399 us / 31126198 us
I (31985) wifi:<ba-del>idx:0, tid:0
I (31985) wifi:new:<6,0>, old:<6,0>, ap:<255,255>, sta:<6,0>, prof:1, snd_ch_cfg:0x0
W (31985) hid_mqtt_light: WiFi disconnected, reason: 8. Trying to reconnect...
I (31995) wifi:flush txq
I (31995) wifi:stop sw txq
I (31995) wifi:lmac stop hw txq
I (32005) wifi:Deinit lldesc rx mblock:10
I (32015) hid_mqtt_light: Preparing for deep sleep.
ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0x1 (POWERON),boot:0x2b (SPI_FAST_FLASH_BOOT)
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2810,len:0x15a0
load:0x403c8700,len:0x4
load:0x403c8704,len:0xd20
load:0x403cb700,len:0x2f00
entry 0x403c8928
I (27) boot: ESP-IDF v5.4.1 2nd stage bootloader
I (27) boot: compile time May 21 2025 14:32:48
I (27) boot: Multicore bootloader
I (27) boot: chip revision: v0.2
I (30) boot: efuse block revision: v1.3
I (34) boot.esp32s3: Boot SPI Speed : 80MHz
I (37) boot.esp32s3: SPI Mode : DIO
I (41) boot.esp32s3: SPI Flash Size : 2MB
I (45) boot: Enabling RNG early entropy source...
I (49) boot: Partition Table:
I (52) boot: ## Label Usage Type ST Offset Length
I (58) boot: 0 nvs WiFi data 01 02 00009000 00006000
I (65) boot: 1 phy_init RF data 01 01 0000f000 00001000
I (71) boot: 2 factory factory app 00 00 00010000 00100000
I (78) boot: End of partition table
I (81) esp_image: segment 0: paddr=00010020 vaddr=3c0c0020 size=24ad4h (150228) map
I (115) esp_image: segment 1: paddr=00034afc vaddr=3fc9bb00 size=04a84h ( 19076) load
I (119) esp_image: segment 2: paddr=00039588 vaddr=40374000 size=06a90h ( 27280) load
I (125) esp_image: segment 3: paddr=00040020 vaddr=42000020 size=b1788h (726920) map
I (255) esp_image: segment 4: paddr=000f17b0 vaddr=4037aa90 size=10f98h ( 69528) load
I (270) esp_image: segment 5: paddr=00102750 vaddr=50000000 size=00018h ( 24) load
I (270) esp_image: segment 6: paddr=00102770 vaddr=600fe000 size=00100h ( 256) load
I (274) esp_image: segment 7: paddr=00102878 vaddr=600fe100 size=00020h ( 32) load
I (290) boot: Loaded app from partition at offset 0x10000
I (291) boot: Disabling RNG early entropy source...
I (303) cpu_start: Multicore app
I (312) cpu_start: Pro cpu start user code
I (312) cpu_start: cpu freq: 160000000 Hz
I (312) app_init: Application information:
I (312) app_init: Project name: Keyboard_lights_2
I (317) app_init: App version: 40f8561
I (321) app_init: Compile time: May 21 2025 14:27:23
I (326) app_init: ELF file SHA256: 514a8f0c1...
I (330) app_init: ESP-IDF: v5.4.1
I (334) efuse_init: Min chip rev: v0.0
I (338) efuse_init: Max chip rev: v0.99 
I (342) efuse_init: Chip rev: v0.2
I (346) heap_init: Initializing. RAM available for dynamic allocation:
I (352) heap_init: At 3FCA4980 len 00044D90 (275 KiB): RAM
I (357) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (362) heap_init: At 3FCF0000 len 00008000 (32 KiB): DRAM
I (367) heap_init: At 600FE120 len 00001EC8 (7 KiB): RTCRAM
I (374) spi_flash: detected chip: generic
I (376) spi_flash: flash io: dio
W (379) spi_flash: Detected size(16384k) larger than the size in the binary image header(2048k). Using the size in the binary image header.
I (392) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (398) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (405) main_task: Started on CPU0
I (425) main_task: Calling app_main()
I (445) hid_mqtt_light: Fresh boot or invalid RTC data. Initializing defaults.
I (445) hid_mqtt_light: Initial/Restored state: Target 0 (sams_bed_lamp), Mode Brightness
I (455) hid_mqtt_light: Light 0 (sams_bed_lamp): On=0, Bright=5, HueIdx=0
I (455) hid_mqtt_light: Light 1 (joanna_red_reading_light_light): On=0, Bright=5, HueIdx=0
I (465) hid_mqtt_light: Light 2 (bed_sam_jo_chandelier_1): On=0, Bright=5, HueIdx=0
I (475) pp: pp rom version: e7ae62f
I (475) net80211: net80211 rom version: e7ae62f
I (495) wifi:wifi driver task: 3fcaf510, prio:23, stack:6656, core=0
I (505) wifi:wifi firmware version: 79fa3f41ba
I (505) wifi:wifi certification version: v7.0
I (505) wifi:config NVS flash: enabled
I (505) wifi:config nano formatting: disabled
I (505) wifi:Init data frame dynamic rx buffer num: 32
I (515) wifi:Init static rx mgmt buffer num: 5
I (515) wifi:Init management short buffer num: 32
I (525) wifi:Init dynamic tx buffer num: 32
I (525) wifi:Init static tx FG buffer num: 2
I (535) wifi:Init static rx buffer size: 1600
I (535) wifi:Init static rx buffer num: 10
I (535) wifi:Init dynamic rx buffer num: 32
I (545) wifi_init: rx ba win: 6
I (545) wifi_init: accept mbox: 6
I (545) wifi_init: tcpip mbox: 32
I (555) wifi_init: udp mbox: 6
I (555) wifi_init: tcp mbox: 6
I (555) wifi_init: tcp tx win: 5760
I (555) wifi_init: tcp rx win: 5760
I (565) wifi_init: tcp mss: 1440
I (565) wifi_init: WiFi IRAM OP enabled
I (565) wifi_init: WiFi RX IRAM OP enabled
W (575) wifi:Password length matches WPA2 standards, authmode threshold changes from OPEN to WPA2
I (585) phy_init: phy_version 700,8582a7fd,Feb 10 2025,20:13:11
I (625) phy_init: Saving new calibration data due to checksum failure or outdated calibration data, mode(0)
I (645) wifi:mode : sta (98:a3:16:e2:6c:54)
I (645) wifi:enable tsf
I (645) hid_mqtt_light: wifi_init_sta finished. Connecting to AP...
I (645) hid_mqtt_light: WIFI_EVENT_STA_START, connecting...
I (655) hid_mqtt_light: Installing USB Host...
I (655) wifi:new:<6,0>, old:<1,0>, ap:<255,255>, sta:<6,0>, prof:1, snd_ch_cfg:0x0
I (665) wifi:state: init -> auth (0xb0)
I (675) wifi:state: auth -> assoc (0x0)
I (685) hid_mqtt_light: USB Host installed.
I (685) hid_mqtt_light: Installing HID Host driver...
I (685) hid_mqtt_light: HID Host driver installed.
I (685) hid_mqtt_light: Application started. Waiting for HID Device connection or events...
I (685) wifi:state: assoc -> run (0x10)
I (755) wifi:connected with Aussie Broadband 8729, aid = 31, channel 6, BW20, bssid = d0:db:b7:9f:56:a8
I (755) wifi:security: WPA2-PSK, phy: bgn, rssi: -62
I (755) wifi:pm start, type: 1
I (755) wifi:dp: 1, bi: 102400, li: 3, scale listen interval from 307200 us to 307200 us
I (765) wifi:set rx beacon pti, rx_bcn_pti: 0, bcn_timeout: 25000, mt_pti: 0, mt_time: 10000
I (785) wifi:AP's beacon interval = 102400 us, DTIM period = 1
I (785) wifi:<ba-add>idx:0 (ifx:0, d0:db:b7:9f:56:a8), tid:0, ssn:0, winSize:64
I (1065) hid_mqtt_light: HID Device CONNECTED (Driver Event): Protocol 1 Subclass 1
I (1065) hid_mqtt_light: HID device started successfully.
I (1065) hid_mqtt_light: HID Device CONNECTED (Driver Event): Protocol 0 Subclass 0
W (1075) hid_mqtt_light: Keyboard report too short (0 bytes)
W (1075) hid_mqtt_light: Ignoring connected HID device - not a Boot Protocol Keyboard.
I (1085) hid_mqtt_light: HID Device CONNECTED (Driver Event): Protocol 2 Subclass 1
W (1095) hid_mqtt_light: Ignoring connected HID device - not a Boot Protocol Keyboard.
I (1825) esp_netif_handlers: sta ip: 192.168.20.45, mask: 255.255.255.0, gw: 192.168.20.1
I (1825) hid_mqtt_light: Got IP:192.168.20.45
I (1825) hid_mqtt_light: Other event id:7
I (1855) hid_mqtt_light: MQTT_EVENT_CONNECTED
I (3125) hid_mqtt_light: Key pressed: c
I (3125) hid_mqtt_light: Light bed_sam_jo_chandelier_1 turned ON.
I (3125) hid_mqtt_light: publish_light_state: WiFi has IP: YES, MQTT Globally Connected: YES
I (3135) hid_mqtt_light: Publishing to homeassistant/light/remote: {"target_light":"bed_sam_jo_chandelier_1","state":"ON","brightness":128,"color_temp":2200,"xy_color":[0.53032141923904419,0.41342452168464661]}
I (3155) hid_mqtt_light: Current Target: bed_sam_jo_chandelier_1
I (3175) hid_mqtt_light: MQTT_EVENT_PUBLISHED, msg_id=51463
I (5775) hid_mqtt_light: Key pressed: f
I (5775) hid_mqtt_light: publish_light_state: WiFi has IP: YES, MQTT Globally Connected: YES
I (5775) hid_mqtt_light: Publishing to homeassistant/light/remote: {"target_light":"bed_sam_jo_chandelier_1","state":"ON","brightness":153,"color_temp":2200,"xy_color":[0.53032141923904419,0.41342452168464661]}
I (5795) hid_mqtt_light: Light 2 (bed_sam_jo_chandelier_1): Brightness 6, Hue Index 0
I (5805) hid_mqtt_light: MQTT_EVENT_PUBLISHED, msg_id=22375
I (6015) hid_mqtt_light: Key pressed: f
I (6015) hid_mqtt_light: publish_light_state: WiFi has IP: YES, MQTT Globally Connected: YES
I (6015) hid_mqtt_light: Publishing to homeassistant/light/remote: {"target_light":"bed_sam_jo_chandelier_1","state":"ON","brightness":179,"color_temp":2200,"xy_color":[0.53032141923904419,0.41342452168464661]}
I (6035) hid_mqtt_light: Light 2 (bed_sam_jo_chandelier_1): Brightness 7, Hue Index 0
I (6045) hid_mqtt_light: MQTT_EVENT_PUBLISHED, msg_id=13574
I (6315) hid_mqtt_light: Key pressed: f
I (6315) hid_mqtt_light: publish_light_state: WiFi has IP: YES, MQTT Globally Connected: YES
I (6315) hid_mqtt_light: Publishing to homeassistant/light/remote: {"target_light":"bed_sam_jo_chandelier_1","state":"ON","brightness":204,"color_temp":2200,"xy_color":[0.53032141923904419,0.41342452168464661]}
I (6335) hid_mqtt_light: Light 2 (bed_sam_jo_chandelier_1): Brightness 8, Hue Index 0
I (6345) hid_mqtt_light: MQTT_EVENT_PUBLISHED, msg_id=2807
I (6595) hid_mqtt_light: Key pressed: f
I (6595) hid_mqtt_light: publish_light_state: WiFi has IP: YES, MQTT Globally Connected: YES
I (6605) hid_mqtt_light: Publishing to homeassistant/light/remote: {"target_light":"bed_sam_jo_chandelier_1","state":"ON","brightness":230,"color_temp":2200,"xy_color":[0.53032141923904419,0.41342452168464661]}
I (6625) hid_mqtt_light: Light 2 (bed_sam_jo_chandelier_1): Brightness 9, Hue Index 0
I (6625) hid_mqtt_light: MQTT_EVENT_PUBLISHED, msg_id=29312
I (7115) hid_mqtt_light: Key pressed: c
I (7115) hid_mqtt_light: Light bed_sam_jo_chandelier_1 turned OFF.
I (7115) hid_mqtt_light: publish_light_state: WiFi has IP: YES, MQTT Globally Connected: YES
I (7115) hid_mqtt_light: Publishing to homeassistant/light/remote: {"target_light":"bed_sam_jo_chandelier_1","state":"OFF"}
I (7135) hid_mqtt_light: Current Target: bed_sam_jo_chandelier_1
I (7145) hid_mqtt_light: MQTT_EVENT_PUBLISHED, msg_id=20764
E (20275) hid-host: Transfer failed, status 1
W (20275) hid_mqtt_light: HID Device, Protocol '1' TRANSFER_ERROR
E (20325) hid-host: hid_host_interface_release_and_free_transfer(604): Unable to release HID Interface
E (20325) hid-host: hid_host_device_close(1213): Unable to release HID Interface
E (20325) hid_mqtt_light: Failed to close device on transfer error: ESP_ERR_INVALID_STATE
I (37115) hid_mqtt_light: Inactivity timeout. Entering deep sleep.
I (37115) mqtt_client: Client asked to disconnect
I (37115) wifi:state: run -> init (0x0)
I (37125) wifi:pm stop, total sleep time: 30046294 us / 36362460 us
I (37125) wifi:<ba-del>idx:0, tid:0
I (37125) wifi:new:<6,0>, old:<6,0>, ap:<255,255>, sta:<6,0>, prof:1, snd_ch_cfg:0x0
W (37135) hid_mqtt_light: WiFi disconnected, reason: 8. Trying to reconnect...
I (37215) wifi:flush txq
I (37215) wifi:stop sw txq
I (37215) wifi:lmac stop hw txq
I (37215) wifi:Deinit lldesc rx mblock:10
I (37225) hid_mqtt_light: Preparing for deep sleep.
ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0x1 (POWERON),boot:0x8 (SPI_FAST_FLASH_BOOT)
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2810,len:0x15a0
load:0x403c8700,len:0x4
load:0x403c8704,len:0xd20
load:0x403cb700,len:0x2f00
entry 0x403c8928
I (27) boot: ESP-IDF v5.4.1 2nd stage bootloader
I (27) boot: compile time May 21 2025 14:32:48
I (27) boot: Multicore bootloader
I (27) boot: chip revision: v0.2
I (30) boot: efuse block revision: v1.3
I (33) boot.esp32s3: Boot SPI Speed : 80MHz
I (37) boot.esp32s3: SPI Mode : DIO
I (41) boot.esp32s3: SPI Flash Size : 2MB
I (45) boot: Enabling RNG early entropy source...
I (49) boot: Partition Table:
I (52) boot: ## Label Usage Type ST Offset Length
I (58) boot: 0 nvs WiFi data 01 02 00009000 00006000
I (65) boot: 1 phy_init RF data 01 01 0000f000 00001000
I (71) boot: 2 factory factory app 00 00 00010000 00100000
I (78) boot: End of partition table
I (81) esp_image: segment 0: paddr=00010020 vaddr=3c0c0020 size=24ad4h (150228) map
I (115) esp_image: segment 1: paddr=00034afc vaddr=3fc9bb00 size=04a84h ( 19076) load
I (119) esp_image: segment 2: paddr=00039588 vaddr=40374000 size=06a90h ( 27280) load
I (125) esp_image: segment 3: paddr=00040020 vaddr=42000020 size=b1788h (726920) map
I (254) esp_image: segment 4: paddr=000f17b0 vaddr=4037aa90 size=10f98h ( 69528) load
I (270) esp_image: segment 5: paddr=00102750 vaddr=50000000 size=00018h ( 24) load
I (270) esp_image: segment 6: paddr=00102770 vaddr=600fe000 size=00100h ( 256) load
I (274) esp_image: segment 7: paddr=00102878 vaddr=600fe100 size=00020h ( 32) load
I (290) boot: Loaded app from partition at offset 0x10000
I (291) boot: Disabling RNG early entropy source...
I (303) cpu_start: Multicore app
I (312) cpu_start: Pro cpu start user code
I (312) cpu_start: cpu freq: 160000000 Hz
I (312) app_init: Application information:
I (312) app_init: Project name: Keyboard_lights_2
I (317) app_init: App version: 40f8561
I (321) app_init: Compile time: May 21 2025 14:27:23
I (326) app_init: ELF file SHA256: 514a8f0c1...
I (330) app_init: ESP-IDF: v5.4.1
I (334) efuse_init: Min chip rev: v0.0
I (338) efuse_init: Max chip rev: v0.99 
I (342) efuse_init: Chip rev: v0.2
I (345) heap_init: Initializing. RAM available for dynamic allocation:
I (352) heap_init: At 3FCA4980 len 00044D90 (275 KiB): RAM
I (357) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (362) heap_init: At 3FCF0000 len 00008000 (32 KiB): DRAM
I (367) heap_init: At 600FE120 len 00001EC8 (7 KiB): RTCRAM
I (374) spi_flash: detected chip: generic
I (376) spi_flash: flash io: dio
W (379) spi_flash: Detected size(16384k) larger than the size in the binary image header(2048k). Using the size in the binary image header.
I (392) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (398) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (405) main_task: Started on CPU0
I (425) main_task: Calling app_main()
I (445) hid_mqtt_light: Fresh boot or invalid RTC data. Initializing defaults.
I (445) hid_mqtt_light: Initial/Restored state: Target 0 (sams_bed_lamp), Mode Brightness
I (455) hid_mqtt_light: Light 0 (sams_bed_lamp): On=0, Bright=5, HueIdx=0
I (455) hid_mqtt_light: Light 1 (joanna_red_reading_light_light): On=0, Bright=5, HueIdx=0
I (465) hid_mqtt_light: Light 2 (bed_sam_jo_chandelier_1): On=0, Bright=5, HueIdx=0
I (475) pp: pp rom version: e7ae62f
I (475) net80211: net80211 rom version: e7ae62f
I (495) wifi:wifi driver task: 3fcaf510, prio:23, stack:6656, core=0
I (505) wifi:wifi firmware version: 79fa3f41ba
I (505) wifi:wifi certification version: v7.0
I (505) wifi:config NVS flash: enabled
I (505) wifi:config nano formatting: disabled
I (505) wifi:Init data frame dynamic rx buffer num: 32
I (515) wifi:Init static rx mgmt buffer num: 5
I (515) wifi:Init management short buffer num: 32
I (525) wifi:Init dynamic tx buffer num: 32
I (525) wifi:Init static tx FG buffer num: 2
I (535) wifi:Init static rx buffer size: 1600
I (535) wifi:Init static rx buffer num: 10
I (535) wifi:Init dynamic rx buffer num: 32
I (545) wifi_init: rx ba win: 6
I (545) wifi_init: accept mbox: 6
I (545) wifi_init: tcpip mbox: 32
I (555) wifi_init: udp mbox: 6
I (555) wifi_init: tcp mbox: 6
I (555) wifi_init: tcp tx win: 5760
I (555) wifi_init: tcp rx win: 5760
I (565) wifi_init: tcp mss: 1440
I (565) wifi_init: WiFi IRAM OP enabled
I (565) wifi_init: WiFi RX IRAM OP enabled
W (575) wifi:Password length matches WPA2 standards, authmode threshold changes from OPEN to WPA2
I (585) phy_init: phy_version 700,8582a7fd,Feb 10 2025,20:13:11
I (625) phy_init: Saving new calibration data due to checksum failure or outdated calibration data, mode(0)
I (715) wifi:mode : sta (98:a3:16:e2:6c:54)
I (715) wifi:enable tsf
I (715) hid_mqtt_light: wifi_init_sta finished. Connecting to AP...
I (715) hid_mqtt_light: WIFI_EVENT_STA_START, connecting...
I (725) hid_mqtt_light: Installing USB Host...
I (725) wifi:new:<6,0>, old:<1,0>, ap:<255,255>, sta:<6,0>, prof:1, snd_ch_cfg:0x0
I (735) wifi:state: init -> auth (0xb0)
I (745) wifi:state: auth -> assoc (0x0)
I (755) hid_mqtt_light: USB Host installed.
I (755) hid_mqtt_light: Installing HID Host driver...
I (755) hid_mqtt_light: HID Host driver installed.
I (755) hid_mqtt_light: Application started. Waiting for HID Device connection or events...
I (755) wifi:state: assoc -> run (0x10)
I (815) wifi:connected with Aussie Broadband 8729, aid = 25, channel 6, BW20, bssid = d0:db:b7:9f:56:a8
I (825) wifi:security: WPA2-PSK, phy: bgn, rssi: -67
I (825) wifi:pm start, type: 1
I (825) wifi:dp: 1, bi: 102400, li: 3, scale listen interval from 307200 us to 307200 us
I (835) wifi:set rx beacon pti, rx_bcn_pti: 0, bcn_timeout: 25000, mt_pti: 0, mt_time: 10000
I (855) wifi:AP's beacon interval = 102400 us, DTIM period = 1
I (855) wifi:<ba-add>idx:0 (ifx:0, d0:db:b7:9f:56:a8), tid:0, ssn:0, winSize:64
I (1135) hid_mqtt_light: HID Device CONNECTED (Driver Event): Protocol 1 Subclass 1
I (1135) hid_mqtt_light: HID device started successfully.
I (1135) hid_mqtt_light: HID Device CONNECTED (Driver Event): Protocol 0 Subclass 0
W (1145) hid_mqtt_light: Keyboard report too short (0 bytes)
W (1145) hid_mqtt_light: Ignoring connected HID device - not a Boot Protocol Keyboard.
I (1155) hid_mqtt_light: HID Device CONNECTED (Driver Event): Protocol 2 Subclass 1
W (1165) hid_mqtt_light: Ignoring connected HID device - not a Boot Protocol Keyboard.
I (1875) esp_netif_handlers: sta ip: 192.168.20.45, mask: 255.255.255.0, gw: 192.168.20.1
I (1875) hid_mqtt_light: Got IP:192.168.20.45
I (1875) hid_mqtt_light: Other event id:7
I (1905) hid_mqtt_light: MQTT_EVENT_CONNECTED
I (3725) hid_mqtt_light: Key pressed: c
I (3725) hid_mqtt_light: Light bed_sam_jo_chandelier_1 turned ON.
I (3725) hid_mqtt_light: publish_light_state: WiFi has IP: YES, MQTT Globally Connected: YES
I (3735) hid_mqtt_light: Publishing to homeassistant/light/remote: {"target_light":"bed_sam_jo_chandelier_1","state":"ON","brightness":128,"color_temp":2200,"xy_color":[0.53032141923904419,0.41342452168464661]}
I (3755) hid_mqtt_light: Current Target: bed_sam_jo_chandelier_1
I (3755) hid_mqtt_light: MQTT_EVENT_PUBLISHED, msg_id=45758
I (8665) hid_mqtt_light: Key pressed: c
I (8665) hid_mqtt_light: Light bed_sam_jo_chandelier_1 turned OFF.
I (8665) hid_mqtt_light: publish_light_state: WiFi has IP: YES, MQTT Globally Connected: YES
I (8665) hid_mqtt_light: Publishing to homeassistant/light/remote: {"target_light":"bed_sam_jo_chandelier_1","state":"OFF"}
I (8685) hid_mqtt_light: Current Target: bed_sam_jo_chandelier_1
I (8795) hid_mqtt_light: MQTT_EVENT_PUBLISHED, msg_id=65482
E (24055) hid-host: Transfer failed, status 1
W (24055) hid_mqtt_light: HID Device, Protocol '1' TRANSFER_ERROR
E (24105) hid-host: hid_host_interface_release_and_free_transfer(604): Unable to release HID Interface
E (24105) hid-host: hid_host_device_close(1213): Unable to release HID Interface
E (24105) hid_mqtt_light: Failed to close device on transfer error: ESP_ERR_INVALID_STATE
I (38665) hid_mqtt_light: Inactivity timeout. Entering deep sleep.
I (38665) mqtt_client: Client asked to disconnect
I (38735) wifi:state: run -> init (0x0)
I (38745) wifi:pm stop, total sleep time: 31816549 us / 37915689 us
I (38745) wifi:<ba-del>idx:0, tid:0
I (38745) wifi:new:<6,0>, old:<6,0>, ap:<255,255>, sta:<6,0>, prof:1, snd_ch_cfg:0x0
W (38755) hid_mqtt_light: WiFi disconnected, reason: 8. Trying to reconnect...
I (38915) wifi:flush txq
I (38915) wifi:stop sw txq
I (38915) wifi:lmac stop hw txq
I (38915) wifi:Deinit lldesc rx mblock:10
I (38925) hid_mqtt_light: Preparing for deep sleep.
ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0x1 (POWERON),boot:0x8 (SPI_FAST_FLASH_BOOT)
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2810,len:0x15a0
load:0x403c8700,len:0x4
load:0x403c8704,len:0xd20
load:0x403cb700,len:0x2f00
entry 0x403c8928
I (27) boot: ESP-IDF v5.4.1 2nd stage bootloader
I (27) boot: compile time May 21 2025 14:32:48
I (27) boot: Multicore bootloader
I (27) boot: chip revision: v0.2
I (30) boot: efuse block revision: v1.3
I (33) boot.esp32s3: Boot SPI Speed : 80MHz
I (37) boot.esp32s3: SPI Mode : DIO
I (41) boot.esp32s3: SPI Flash Size : 2MB
I (45) boot: Enabling RNG early entropy source...
I (49) boot: Partition Table:
I (52) boot: ## Label Usage Type ST Offset Length
I (58) boot: 0 nvs WiFi data 01 02 00009000 00006000
I (65) boot: 1 phy_init RF data 01 01 0000f000 00001000
I (71) boot: 2 factory factory app 00 00 00010000 00100000
I (78) boot: End of partition table
I (81) esp_image: segment 0: paddr=00010020 vaddr=3c0c0020 size=24ad4h (150228) map
I (115) esp_image: segment 1: paddr=00034afc vaddr=3fc9bb00 size=04a84h ( 19076) load
I (119) esp_image: segment 2: paddr=00039588 vaddr=40374000 size=06a90h ( 27280) load
I (125) esp_image: segment 3: paddr=00040020 vaddr=42000020 size=b1788h (726920) map
I (254) esp_image: segment 4: paddr=000f17b0 vaddr=4037aa90 size=10f98h ( 69528) load
I (270) esp_image: segment 5: paddr=00102750 vaddr=50000000 size=00018h ( 24) load
I (270) esp_image: segment 6: paddr=00102770 vaddr=600fe000 size=00100h ( 256) load
I (274) esp_image: segment 7: paddr=00102878 vaddr=600fe100 size=00020h ( 32) load
I (290) boot: Loaded app from partition at offset 0x10000
I (291) boot: Disabling RNG early entropy source...
I (303) cpu_start: Multicore app
I (312) cpu_start: Pro cpu start user code
I (312) cpu_start: cpu freq: 160000000 Hz
I (312) app_init: Application information:
I (312) app_init: Project name: Keyboard_lights_2
I (317) app_init: App version: 40f8561
I (321) app_init: Compile time: May 21 2025 14:27:23
I (326) app_init: ELF file SHA256: 514a8f0c1...
I (330) app_init: ESP-IDF: v5.4.1
I (334) efuse_init: Min chip rev: v0.0
I (338) efuse_init: Max chip rev: v0.99 
I (342) efuse_init: Chip rev: v0.2
I (345) heap_init: Initializing. RAM available for dynamic allocation:
I (352) heap_init: At 3FCA4980 len 00044D90 (275 KiB): RAM
I (357) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (362) heap_init: At 3FCF0000 len 00008000 (32 KiB): DRAM
I (367) heap_init: At 600FE120 len 00001EC8 (7 KiB): RTCRAM
I (374) spi_flash: detected chip: generic
I (376) spi_flash: flash io: dio
W (379) spi_flash: Detected size(16384k) larger than the size in the binary image header(2048k). Using the size in the binary image header.
I (392) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (398) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (405) main_task: Started on CPU0
I (425) main_task: Calling app_main()
I (445) hid_mqtt_light: Fresh boot or invalid RTC data. Initializing defaults.
I (445) hid_mqtt_light: Initial/Restored state: Target 0 (sams_bed_lamp), Mode Brightness
I (455) hid_mqtt_light: Light 0 (sams_bed_lamp): On=0, Bright=5, HueIdx=0
I (455) hid_mqtt_light: Light 1 (joanna_red_reading_light_light): On=0, Bright=5, HueIdx=0
I (465) hid_mqtt_light: Light 2 (bed_sam_jo_chandelier_1): On=0, Bright=5, HueIdx=0
I (475) pp: pp rom version: e7ae62f
I (475) net80211: net80211 rom version: e7ae62f
I (495) wifi:wifi driver task: 3fcaf510, prio:23, stack:6656, core=0
I (505) wifi:wifi firmware version: 79fa3f41ba
I (505) wifi:wifi certification version: v7.0
I (505) wifi:config NVS flash: enabled
I (505) wifi:config nano formatting: disabled
I (505) wifi:Init data frame dynamic rx buffer num: 32
I (515) wifi:Init static rx mgmt buffer num: 5
I (515) wifi:Init management short buffer num: 32
I (525) wifi:Init dynamic tx buffer num: 32
I (525) wifi:Init static tx FG buffer num: 2
I (535) wifi:Init static rx buffer size: 1600
I (535) wifi:Init static rx buffer num: 10
I (535) wifi:Init dynamic rx buffer num: 32
I (545) wifi_init: rx ba win: 6
I (545) wifi_init: accept mbox: 6
I (545) wifi_init: tcpip mbox: 32
I (555) wifi_init: udp mbox: 6
I (555) wifi_init: tcp mbox: 6
I (555) wifi_init: tcp tx win: 5760
I (555) wifi_init: tcp rx win: 5760
I (565) wifi_init: tcp mss: 1440
I (565) wifi_init: WiFi IRAM OP enabled
I (565) wifi_init: WiFi RX IRAM OP enabled
W (575) wifi:Password length matches WPA2 standards, authmode threshold changes from OPEN to WPA2
I (585) phy_init: phy_version 700,8582a7fd,Feb 10 2025,20:13:11
I (635) phy_init: Saving new calibration data due to checksum failure or outdated calibration data, mode(0)
I (655) wifi:mode : sta (98:a3:16:e2:6c:54)
I (655) wifi:enable tsf
I (655) hid_mqtt_light: wifi_init_sta finished. Connecting to AP...
I (655) hid_mqtt_light: WIFI_EVENT_STA_START, connecting...
I (665) hid_mqtt_light: Installing USB Host...
I (665) wifi:new:<6,0>, old:<1,0>, ap:<255,255>, sta:<6,0>, prof:1, snd_ch_cfg:0x0
I (675) wifi:state: init -> auth (0xb0)
I (685) wifi:state: auth -> assoc (0x0)
I (695) hid_mqtt_light: USB Host installed.
I (695) wifi:state: assoc -> run (0x10)
I (695) hid_mqtt_light: Installing HID Host driver...
I (695) hid_mqtt_light: HID Host driver installed.
I (695) hid_mqtt_light: Application started. Waiting for HID Device connection or events...
I (795) wifi:connected with Aussie Broadband 8729, aid = 27, channel 6, BW20, bssid = d0:db:b7:9f:56:a8
I (795) wifi:security: WPA2-PSK, phy: bgn, rssi: -59
I (795) wifi:pm start, type: 1
I (795) wifi:dp: 1, bi: 102400, li: 3, scale listen interval from 307200 us to 307200 us
I (805) wifi:set rx beacon pti, rx_bcn_pti: 0, bcn_timeout: 25000, mt_pti: 0, mt_time: 10000
I (825) wifi:<ba-add>idx:0 (ifx:0, d0:db:b7:9f:56:a8), tid:0, ssn:0, winSize:64
I (835) wifi:AP's beacon interval = 102400 us, DTIM period = 1
I (1075) hid_mqtt_light: HID Device CONNECTED (Driver Event): Protocol 1 Subclass 1
I (1075) hid_mqtt_light: HID device started successfully.
I (1075) hid_mqtt_light: HID Device CONNECTED (Driver Event): Protocol 0 Subclass 0
W (1085) hid_mqtt_light: Keyboard report too short (0 bytes)
W (1085) hid_mqtt_light: Ignoring connected HID device - not a Boot Protocol Keyboard.
I (1095) hid_mqtt_light: HID Device CONNECTED (Driver Event): Protocol 2 Subclass 1
W (1105) hid_mqtt_light: Ignoring connected HID device - not a Boot Protocol Keyboard.
I (1865) esp_netif_handlers: sta ip: 192.168.20.45, mask: 255.255.255.0, gw: 192.168.20.1
I (1865) hid_mqtt_light: Got IP:192.168.20.45
I (1865) hid_mqtt_light: Other event id:7
I (1905) hid_mqtt_light: MQTT_EVENT_CONNECTED
I (3275) hid_mqtt_light: Key pressed: c
I (3275) hid_mqtt_light: Light bed_sam_jo_chandelier_1 turned ON.
I (3275) hid_mqtt_light: publish_light_state: WiFi has IP: YES, MQTT Globally Connected: YES
I (3285) hid_mqtt_light: Publishing to homeassistant/light/remote: {"target_light":"bed_sam_jo_chandelier_1","state":"ON","brightness":128,"color_temp":2200,"xy_color":[0.53032141923904419,0.41342452168464661]}
I (3305) hid_mqtt_light: Current Target: bed_sam_jo_chandelier_1
I (3315) hid_mqtt_light: MQTT_EVENT_PUBLISHED, msg_id=35889
I (7125) hid_mqtt_light: Key pressed: c
I (7125) hid_mqtt_light: Light bed_sam_jo_chandelier_1 turned OFF.
I (7125) hid_mqtt_light: publish_light_state: WiFi has IP: YES, MQTT Globally Connected: YES
I (7135) hid_mqtt_light: Publishing to homeassistant/light/remote: {"target_light":"bed_sam_jo_chandelier_1","state":"OFF"}
I (7145) hid_mqtt_light: Current Target: bed_sam_jo_chandelier_1
I (7155) hid_mqtt_light: MQTT_EVENT_PUBLISHED, msg_id=42619
I (8025) hid_mqtt_light: Key pressed: d
I (8025) hid_mqtt_light: Light 2 (bed_sam_jo_chandelier_1): Brightness 4, Hue Index 0
I (8445) hid_mqtt_light: Key pressed: f
I (8445) hid_mqtt_light: Light 2 (bed_sam_jo_chandelier_1): Brightness 5, Hue Index 0
I (8815) hid_mqtt_light: Key pressed: f
I (8815) hid_mqtt_light: Light 2 (bed_sam_jo_chandelier_1): Brightness 6, Hue Index 0
E (26075) hid-host: Transfer failed, status 1
W (26075) hid_mqtt_light: HID Device, Protocol '1' TRANSFER_ERROR
E (26125) hid-host: hid_host_interface_release_and_free_transfer(604): Unable to release HID Interface
E (26125) hid-host: hid_host_device_close(1213): Unable to release HID Interface
E (26125) hid_mqtt_light: Failed to close device on transfer error: ESP_ERR_INVALID_STATE
I (38815) hid_mqtt_light: Inactivity timeout. Entering deep sleep.
I (38815) mqtt_client: Client asked to disconnect
I (38825) wifi:state: run -> init (0x0)
I (38835) wifi:pm stop, total sleep time: 31790135 us / 38032804 us
I (38835) wifi:<ba-del>idx:0, tid:0
I (38835) wifi:new:<6,0>, old:<6,0>, ap:<255,255>, sta:<6,0>, prof:1, snd_ch_cfg:0x0
W (38835) hid_mqtt_light: WiFi disconnected, reason: 8. Trying to reconnect...
I (38885) wifi:flush txq
I (38885) wifi:stop sw txq
I (38885) wifi:lmac stop hw txq
I (38885) wifi:Deinit lldesc rx mblock:10
I (38895) hid_mqtt_light: Preparing for deep sleep.
ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0x1 (POWERON),boot:0x8 (SPI_FAST_FLASH_BOOT)
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2810,len:0x15a0
load:0x403c8700,len:0x4
load:0x403c8704,len:0xd20
load:0x403cb700,len:0x2f00
entry 0x403c8928
I (27) boot: ESP-IDF v5.4.1 2nd stage bootloader
I (27) boot: compile time May 21 2025 14:32:48
I (27) boot: Multicore bootloader
I (27) boot: chip revision: v0.2
I (30) boot: efuse block revision: v1.3
I (33) boot.esp32s3: Boot SPI Speed : 80MHz
I (37) boot.esp32s3: SPI Mode : DIO
I (41) boot.esp32s3: SPI Flash Size : 2MB
I (45) boot: Enabling RNG early entropy source...
I (49) boot: Partition Table:
I (52) boot: ## Label Usage Type ST Offset Length
I (58) boot: 0 nvs WiFi data 01 02 00009000 00006000
I (65) boot: 1 phy_init RF data 01 01 0000f000 00001000
I (71) boot: 2 factory factory app 00 00 00010000 00100000
I (78) boot: End of partition table
I (81) esp_image: segment 0: paddr=00010020 vaddr=3c0c0020 size=24ad4h (150228) map
I (115) esp_image: segment 1: paddr=00034afc vaddr=3fc9bb00 size=04a84h ( 19076) load
I (119) esp_image: segment 2: paddr=00039588 vaddr=40374000 size=06a90h ( 27280) load
I (125) esp_image: segment 3: paddr=00040020 vaddr=42000020 size=b1788h (726920) map
I (254) esp_image: segment 4: paddr=000f17b0 vaddr=4037aa90 size=10f98h ( 69528) load
I (270) esp_image: segment 5: paddr=00102750 vaddr=50000000 size=00018h ( 24) load
I (270) esp_image: segment 6: paddr=00102770 vaddr=600fe000 size=00100h ( 256) load
I (274) esp_image: segment 7: paddr=00102878 vaddr=600fe100 size=00020h ( 32) load
I (290) boot: Loaded app from partition at offset 0x10000
I (291) boot: Disabling RNG early entropy source...
I (303) cpu_start: Multicore app
I (312) cpu_start: Pro cpu start user code
I (312) cpu_start: cpu freq: 160000000 Hz
I (312) app_init: Application information:
I (312) app_init: Project name: Keyboard_lights_2
I (317) app_init: App version: 40f8561
I (321) app_init: Compile time: May 21 2025 14:27:23
I (326) app_init: ELF file SHA256: 514a8f0c1...
I (330) app_init: ESP-IDF: v5.4.1
I (334) efuse_init: Min chip rev: v0.0
I (338) efuse_init: Max chip rev: v0.99 
I (342) efuse_init: Chip rev: v0.2
I (345) heap_init: Initializing. RAM available for dynamic allocation:
I (352) heap_init: At 3FCA4980 len 00044D90 (275 KiB): RAM
I (357) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (362) heap_init: At 3FCF0000 len 00008000 (32 KiB): DRAM
I (367) heap_init: At 600FE120 len 00001EC8 (7 KiB): RTCRAM
I (374) spi_flash: detected chip: generic
I (376) spi_flash: flash io: dio
W (379) spi_flash: Detected size(16384k) larger than the size in the binary image header(2048k). Using the size in the binary image header.
I (392) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (398) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (405) main_task: Started on CPU0
I (425) main_task: Calling app_main()
I (445) hid_mqtt_light: Fresh boot or invalid RTC data. Initializing defaults.
I (445) hid_mqtt_light: Initial/Restored state: Target 0 (sams_bed_lamp), Mode Brightness
I (455) hid_mqtt_light: Light 0 (sams_bed_lamp): On=0, Bright=5, HueIdx=0
I (455) hid_mqtt_light: Light 1 (joanna_red_reading_light_light): On=0, Bright=5, HueIdx=0
I (465) hid_mqtt_light: Light 2 (bed_sam_jo_chandelier_1): On=0, Bright=5, HueIdx=0
I (475) pp: pp rom version: e7ae62f
I (475) net80211: net80211 rom version: e7ae62f
I (495) wifi:wifi driver task: 3fcaf48c, prio:23, stack:6656, core=0
I (505) wifi:wifi firmware version: 79fa3f41ba
I (505) wifi:wifi certification version: v7.0
I (505) wifi:config NVS flash: enabled
I (505) wifi:config nano formatting: disabled
I (505) wifi:Init data frame dynamic rx buffer num: 32
I (515) wifi:Init static rx mgmt buffer num: 5
I (515) wifi:Init management short buffer num: 32
I (525) wifi:Init dynamic tx buffer num: 32
I (525) wifi:Init static tx FG buffer num: 2
I (535) wifi:Init static rx buffer size: 1600
I (535) wifi:Init static rx buffer num: 10
I (535) wifi:Init dynamic rx buffer num: 32
I (545) wifi_init: rx ba win: 6
I (545) wifi_init: accept mbox: 6
I (545) wifi_init: tcpip mbox: 32
I (555) wifi_init: udp mbox: 6
I (555) wifi_init: tcp mbox: 6
I (555) wifi_init: tcp tx win: 5760
I (555) wifi_init: tcp rx win: 5760
I (565) wifi_init: tcp mss: 1440
I (565) wifi_init: WiFi IRAM OP enabled
I (565) wifi_init: WiFi RX IRAM OP enabled
W (575) wifi:Password length matches WPA2 standards, authmode threshold changes from OPEN to WPA2
I (585) phy_init: phy_version 700,8582a7fd,Feb 10 2025,20:13:11
I (635) phy_init: Saving new calibration data due to checksum failure or outdated calibration data, mode(0)
I (715) wifi:mode : sta (98:a3:16:e2:6c:54)
I (715) wifi:enable tsf
I (715) hid_mqtt_light: wifi_init_sta finished. Connecting to AP...
I (715) hid_mqtt_light: WIFI_EVENT_STA_START, connecting...
I (725) hid_mqtt_light: Installing USB Host...
I (745) wifi:new:<6,0>, old:<1,0>, ap:<255,255>, sta:<6,0>, prof:1, snd_ch_cfg:0x0
I (745) wifi:state: init -> auth (0xb0)
I (755) hid_mqtt_light: USB Host installed.
I (755) hid_mqtt_light: Installing HID Host driver...
I (755) hid_mqtt_light: HID Host driver installed.
I (755) wifi:state: auth -> assoc (0x0)
I (765) hid_mqtt_light: Application started. Waiting for HID Device connection or events...
I (765) wifi:state: assoc -> run (0x10)
I (855) wifi:connected with Aussie Broadband 8729, aid = 48, channel 6, BW20, bssid = d0:db:b7:9f:56:a8
I (855) wifi:security: WPA2-PSK, phy: bgn, rssi: -60
I (865) wifi:pm start, type: 1
I (865) wifi:dp: 1, bi: 102400, li: 3, scale listen interval from 307200 us to 307200 us
I (865) wifi:set rx beacon pti, rx_bcn_pti: 0, bcn_timeout: 25000, mt_pti: 0, mt_time: 10000
I (885) wifi:<ba-add>idx:0 (ifx:0, d0:db:b7:9f:56:a8), tid:0, ssn:0, winSize:64
I (945) wifi:AP's beacon interval = 102400 us, DTIM period = 1
I (1135) hid_mqtt_light: HID Device CONNECTED (Driver Event): Protocol 1 Subclass 1
I (1135) hid_mqtt_light: HID device started successfully.
I (1135) hid_mqtt_light: HID Device CONNECTED (Driver Event): Protocol 0 Subclass 0
W (1145) hid_mqtt_light: Keyboard report too short (0 bytes)
W (1145) hid_mqtt_light: Ignoring connected HID device - not a Boot Protocol Keyboard.
I (1155) hid_mqtt_light: HID Device CONNECTED (Driver Event): Protocol 2 Subclass 1
W (1165) hid_mqtt_light: Ignoring connected HID device - not a Boot Protocol Keyboard.
I (1905) esp_netif_handlers: sta ip: 192.168.20.45, mask: 255.255.255.0, gw: 192.168.20.1
I (1905) hid_mqtt_light: Got IP:192.168.20.45
I (1905) hid_mqtt_light: Other event id:7
I (1945) hid_mqtt_light: MQTT_EVENT_CONNECTED
I (3285) hid_mqtt_light: Key pressed: c
I (3285) hid_mqtt_light: Light bed_sam_jo_chandelier_1 turned ON.
I (3285) hid_mqtt_light: publish_light_state: WiFi has IP: YES, MQTT Globally Connected: YES
I (3295) hid_mqtt_light: Publishing to homeassistant/light/remote: {"target_light":"bed_sam_jo_chandelier_1","state":"ON","brightness":128,"color_temp":2200,"xy_color":[0.53032141923904419,0.41342452168464661]}
I (3315) hid_mqtt_light: Current Target: bed_sam_jo_chandelier_1
I (3315) hid_mqtt_light: MQTT_EVENT_PUBLISHED, msg_id=56017
I (6375) hid_mqtt_light: Key pressed: d
I (6375) hid_mqtt_light: publish_light_state: WiFi has IP: YES, MQTT Globally Connected: YES
I (6375) hid_mqtt_light: Publishing to homeassistant/light/remote: {"target_light":"bed_sam_jo_chandelier_1","state":"ON","brightness":102,"color_temp":2200,"xy_color":[0.53032141923904419,0.41342452168464661]}
I (6395) hid_mqtt_light: Light 2 (bed_sam_jo_chandelier_1): Brightness 4, Hue Index 0
I (6405) hid_mqtt_light: MQTT_EVENT_PUBLISHED, msg_id=9911
I (6475) hid_mqtt_light: Key pressed: d
I (6475) hid_mqtt_light: publish_light_state: WiFi has IP: YES, MQTT Globally Connected: YES
I (6475) hid_mqtt_light: Publishing to homeassistant/light/remote: {"target_light":"bed_sam_jo_chandelier_1","state":"ON","brightness":77,"color_temp":2200,"xy_color":[0.53032141923904419,0.41342452168464661]}
I (6495) hid_mqtt_light: Light 2 (bed_sam_jo_chandelier_1): Brightness 3, Hue Index 0
I (6505) hid_mqtt_light: MQTT_EVENT_PUBLISHED, msg_id=11040
I (6675) hid_mqtt_light: Key pressed: d
I (6675) hid_mqtt_light: publish_light_state: WiFi has IP: YES, MQTT Globally Connected: YES
I (6675) hid_mqtt_light: Publishing to homeassistant/light/remote: {"target_light":"bed_sam_jo_chandelier_1","state":"ON","brightness":51,"color_temp":2200,"xy_color":[0.53032141923904419,0.41342452168464661]}
I (6695) hid_mqtt_light: Light 2 (bed_sam_jo_chandelier_1): Brightness 2, Hue Index 0
I (6705) hid_mqtt_light: MQTT_EVENT_PUBLISHED, msg_id=61550
I (7915) hid_mqtt_light: Key pressed: f
I (7915) hid_mqtt_light: publish_light_state: WiFi has IP: YES, MQTT Globally Connected: YES
I (7915) hid_mqtt_light: Publishing to homeassistant/light/remote: {"target_light":"bed_sam_jo_chandelier_1","state":"ON","brightness":77,"color_temp":2200,"xy_color":[0.53032141923904419,0.41342452168464661]}
I (7935) hid_mqtt_light: Light 2 (bed_sam_jo_chandelier_1): Brightness 3, Hue Index 0
I (7945) hid_mqtt_light: MQTT_EVENT_PUBLISHED, msg_id=37401
I (8065) hid_mqtt_light: Key pressed: f
I (8065) hid_mqtt_light: publish_light_state: WiFi has IP: YES, MQTT Globally Connected: YES
I (8065) hid_mqtt_light: Publishing to homeassistant/light/remote: {"target_light":"bed_sam_jo_chandelier_1","state":"ON","brightness":102,"color_temp":2200,"xy_color":[0.53032141923904419,0.41342452168464661]}
I (8085) hid_mqtt_light: Light 2 (bed_sam_jo_chandelier_1): Brightness 4, Hue Index 0
I (8105) hid_mqtt_light: MQTT_EVENT_PUBLISHED, msg_id=63252
I (8205) hid_mqtt_light: Key pressed: f
I (8205) hid_mqtt_light: publish_light_state: WiFi has IP: YES, MQTT Globally Connected: YES
I (8205) hid_mqtt_light: Publishing to homeassistant/light/remote: {"target_light":"bed_sam_jo_chandelier_1","state":"ON","brightness":128,"color_temp":2200,"xy_color":[0.53032141923904419,0.41342452168464661]}
I (8225) hid_mqtt_light: Light 2 (bed_sam_jo_chandelier_1): Brightness 5, Hue Index 0
I (8235) hid_mqtt_light: MQTT_EVENT_PUBLISHED, msg_id=29100
I (8355) hid_mqtt_light: Key pressed: f
I (8355) hid_mqtt_light: publish_light_state: WiFi has IP: YES, MQTT Globally Connected: YES
I (8355) hid_mqtt_light: Publishing to homeassistant/light/remote: {"target_light":"bed_sam_jo_chandelier_1","state":"ON","brightness":153,"color_temp":2200,"xy_color":[0.53032141923904419,0.41342452168464661]}
I (8375) hid_mqtt_light: Light 2 (bed_sam_jo_chandelier_1): Brightness 6, Hue Index 0
I (8405) hid_mqtt_light: MQTT_EVENT_PUBLISHED, msg_id=49474
I (9075) hid_mqtt_light: Key pressed: f
I (9075) hid_mqtt_light: publish_light_state: WiFi has IP: YES, MQTT Globally Connected: YES
I (9075) hid_mqtt_light: Publishing to homeassistant/light/remote: {"target_light":"bed_sam_jo_chandelier_1","state":"ON","brightness":179,"color_temp":2200,"xy_color":[0.53032141923904419,0.41342452168464661]}
I (9095) hid_mqtt_light: Light 2 (bed_sam_jo_chandelier_1): Brightness 7, Hue Index 0
I (9125) hid_mqtt_light: MQTT_EVENT_PUBLISHED, msg_id=38410
I (9195) hid_mqtt_light: Key pressed: f
I (9195) hid_mqtt_light: publish_light_state: WiFi has IP: YES, MQTT Globally Connected: YES
I (9195) hid_mqtt_light: Publishing to homeassistant/light/remote: {"target_light":"bed_sam_jo_chandelier_1","state":"ON","brightness":204,"color_temp":2200,"xy_color":[0.53032141923904419,0.41342452168464661]}
I (9215) hid_mqtt_light: Light 2 (bed_sam_jo_chandelier_1): Brightness 8, Hue Index 0
I (9235) hid_mqtt_light: MQTT_EVENT_PUBLISHED, msg_id=28310
I (9425) hid_mqtt_light: Key pressed: f
I (9425) hid_mqtt_light: publish_light_state: WiFi has IP: YES, MQTT Globally Connected: YES
I (9425) hid_mqtt_light: Publishing to homeassistant/light/remote: {"target_light":"bed_sam_jo_chandelier_1","state":"ON","brightness":230,"color_temp":2200,"xy_color":[0.53032141923904419,0.41342452168464661]}
I (9445) hid_mqtt_light: Light 2 (bed_sam_jo_chandelier_1): Brightness 9, Hue Index 0
I (9465) hid_mqtt_light: MQTT_EVENT_PUBLISHED, msg_id=47541
I (10225) hid_mqtt_light: Key pressed: f
I (10225) hid_mqtt_light: publish_light_state: WiFi has IP: YES, MQTT Globally Connected: YES
I (10235) hid_mqtt_light: Publishing to homeassistant/light/remote: {"target_light":"bed_sam_jo_chandelier_1","state":"ON","brightness":255,"color_temp":2200,"xy_color":[0.53032141923904419,0.41342452168464661]}
I (10255) hid_mqtt_light: Light 2 (bed_sam_jo_chandelier_1): Brightness 10, Hue Index 0
I (10255) hid_mqtt_light: MQTT_EVENT_PUBLISHED, msg_id=23415
I (10345) hid_mqtt_light: Key pressed: f
I (10345) hid_mqtt_light: Light 2 (bed_sam_jo_chandelier_1): Brightness 10, Hue Index 0
I (11495) hid_mqtt_light: Key pressed: d
I (11495) hid_mqtt_light: publish_light_state: WiFi has IP: YES, MQTT Globally Connected: YES
I (11495) hid_mqtt_light: Publishing to homeassistant/light/remote: {"target_light":"bed_sam_jo_chandelier_1","state":"ON","brightness":230,"color_temp":2200,"xy_color":[0.53032141923904419,0.41342452168464661]}
I (11515) hid_mqtt_light: Light 2 (bed_sam_jo_chandelier_1): Brightness 9, Hue Index 0
I (11525) hid_mqtt_light: MQTT_EVENT_PUBLISHED, msg_id=32729
I (11625) hid_mqtt_light: Key pressed: d
I (11625) hid_mqtt_light: publish_light_state: WiFi has IP: YES, MQTT Globally Connected: YES
I (11635) hid_mqtt_light: Publishing to homeassistant/light/remote: {"target_light":"bed_sam_jo_chandelier_1","state":"ON","brightness":204,"color_temp":2200,"xy_color":[0.53032141923904419,0.41342452168464661]}
I (11655) hid_mqtt_light: Light 2 (bed_sam_jo_chandelier_1): Brightness 8, Hue Index 0
I (11655) hid_mqtt_light: MQTT_EVENT_PUBLISHED, msg_id=54087
I (11775) hid_mqtt_light: Key pressed: d
I (11775) hid_mqtt_light: publish_light_state: WiFi has IP: YES, MQTT Globally Connected: YES
I (11775) hid_mqtt_light: Publishing to homeassistant/light/remote: {"target_light":"bed_sam_jo_chandelier_1","state":"ON","brightness":179,"color_temp":2200,"xy_color":[0.53032141923904419,0.41342452168464661]}
I (11795) hid_mqtt_light: Light 2 (bed_sam_jo_chandelier_1): Brightness 7, Hue Index 0
I (11815) hid_mqtt_light: MQTT_EVENT_PUBLISHED, msg_id=9264
I (12665) hid_mqtt_light: Key pressed: d
I (12665) hid_mqtt_light: publish_light_state: WiFi has IP: YES, MQTT Globally Connected: YES
I (12665) hid_mqtt_light: Publishing to homeassistant/light/remote: {"target_light":"bed_sam_jo_chandelier_1","state":"ON","brightness":153,"color_temp":2200,"xy_color":[0.53032141923904419,0.41342452168464661]}
I (12685) hid_mqtt_light: Light 2 (bed_sam_jo_chandelier_1): Brightness 6, Hue Index 0
I (12695) hid_mqtt_light: MQTT_EVENT_PUBLISHED, msg_id=42022
I (13035) hid_mqtt_light: Key pressed: c
I (13035) hid_mqtt_light: Light bed_sam_jo_chandelier_1 turned OFF.
I (13035) hid_mqtt_light: publish_light_state: WiFi has IP: YES, MQTT Globally Connected: YES
I (13045) hid_mqtt_light: Publishing to homeassistant/light/remote: {"target_light":"bed_sam_jo_chandelier_1","state":"OFF"}
I (13055) hid_mqtt_light: Current Target: bed_sam_jo_chandelier_1
I (13105) hid_mqtt_light: MQTT_EVENT_PUBLISHED, msg_id=23398
I (14045) hid_mqtt_light: Key pressed: c
I (14045) hid_mqtt_light: Light bed_sam_jo_chandelier_1 turned ON.
I (14045) hid_mqtt_light: publish_light_state: WiFi has IP: YES, MQTT Globally Connected: YES
I (14055) hid_mqtt_light: Publishing to homeassistant/light/remote: {"target_light":"bed_sam_jo_chandelier_1","state":"ON","brightness":153,"color_temp":2200,"xy_color":[0.53032141923904419,0.41342452168464661]}
I (14075) hid_mqtt_light: Current Target: bed_sam_jo_chandelier_1
I (14075) hid_mqtt_light: MQTT_EVENT_PUBLISHED, msg_id=11565
I (15865) hid_mqtt_light: Key pressed: e
I (15865) hid_mqtt_light: Control mode switched to: Hue
I (16405) hid_mqtt_light: Key pressed: d
I (16405) hid_mqtt_light: Light 2 (bed_sam_jo_chandelier_1): Brightness 6, Hue Index 0
I (16515) hid_mqtt_light: Key pressed: d
I (16515) hid_mqtt_light: Light 2 (bed_sam_jo_chandelier_1): Brightness 6, Hue Index 0
I (16675) hid_mqtt_light: Key pressed: d
I (16675) hid_mqtt_light: Light 2 (bed_sam_jo_chandelier_1): Brightness 6, Hue Index 0
I (17825) hid_mqtt_light: Key pressed: f
I (17825) hid_mqtt_light: publish_light_state: WiFi has IP: YES, MQTT Globally Connected: YES
I (17835) hid_mqtt_light: Publishing to homeassistant/light/remote: {"target_light":"bed_sam_jo_chandelier_1","state":"ON","brightness":153,"color_temp":4000,"xy_color":[0.312726616859436,0.329023152589798]}
I (17855) hid_mqtt_light: Light 2 (bed_sam_jo_chandelier_1): Brightness 6, Hue Index 1
I (17855) hid_mqtt_light: MQTT_EVENT_PUBLISHED, msg_id=19205
I (17955) hid_mqtt_light: Key pressed: f
I (17955) hid_mqtt_light: publish_light_state: WiFi has IP: YES, MQTT Globally Connected: YES
I (17955) hid_mqtt_light: Publishing to homeassistant/light/remote: {"target_light":"bed_sam_jo_chandelier_1","state":"ON","brightness":153,"color_temp":2700,"xy_color":[0.63999992609024048,0.33000007271766663]}
I (17975) hid_mqtt_light: Light 2 (bed_sam_jo_chandelier_1): Brightness 6, Hue Index 2
I (17995) hid_mqtt_light: MQTT_EVENT_PUBLISHED, msg_id=58640
I (18075) hid_mqtt_light: Key pressed: f
I (18075) hid_mqtt_light: publish_light_state: WiFi has IP: YES, MQTT Globally Connected: YES
I (18075) hid_mqtt_light: Publishing to homeassistant/light/remote: {"target_light":"bed_sam_jo_chandelier_1","state":"ON","brightness":153,"color_temp":3000,"xy_color":[0.500484824180603,0.44079148769378662]}
I (18095) hid_mqtt_light: Light 2 (bed_sam_jo_chandelier_1): Brightness 6, Hue Index 3
I (18105) hid_mqtt_light: MQTT_EVENT_PUBLISHED, msg_id=20125
I (18225) hid_mqtt_light: Key pressed: f
I (18225) hid_mqtt_light: publish_light_state: WiFi has IP: YES, MQTT Globally Connected: YES
I (18235) hid_mqtt_light: Publishing to homeassistant/light/remote: {"target_light":"bed_sam_jo_chandelier_1","state":"ON","brightness":153,"color_temp":3500,"xy_color":[0.41932007670402527,0.505245804786682]}
I (18255) hid_mqtt_light: Light 2 (bed_sam_jo_chandelier_1): Brightness 6, Hue Index 4
I (18275) hid_mqtt_light: MQTT_EVENT_PUBLISHED, msg_id=23351
I (18355) hid_mqtt_light: Key pressed: f
I (18355) hid_mqtt_light: publish_light_state: WiFi has IP: YES, MQTT Globally Connected: YES
I (18355) hid_mqtt_light: Publishing to homeassistant/light/remote: {"target_light":"bed_sam_jo_chandelier_1","state":"ON","brightness":153,"color_temp":5000,"xy_color":[0.300000011920929,0.600000023841858]}
I (18375) hid_mqtt_light: Light 2 (bed_sam_jo_chandelier_1): Brightness 6, Hue Index 5
I (18395) hid_mqtt_light: MQTT_EVENT_PUBLISHED, msg_id=55108
I (18465) hid_mqtt_light: Key pressed: f
I (18465) hid_mqtt_light: publish_light_state: WiFi has IP: YES, MQTT Globally Connected: YES
I (18475) hid_mqtt_light: Publishing to homeassistant/light/remote: {"target_light":"bed_sam_jo_chandelier_1","state":"ON","brightness":153,"color_temp":6500,"xy_color":[0.15000000596046448,0.060000006109476089]}
I (18495) hid_mqtt_light: Light 2 (bed_sam_jo_chandelier_1): Brightness 6, Hue Index 6
I (18495) hi