Initial commit of Arduino libraries

SparkFun_VEML7700_Arduino_Library/examples/Example5_alternatePorts/Example5_alternatePorts.ino

@@ -0,0 +1,50 @@
+/*!
+ * @file Example5_alternatePorts.ino
+ *
+ * This example was written by:
+ * Paul Clark
+ * SparkFun Electronics
+ * November 4th 2021
+ * 
+ * This example demonstrates how to use alternate Wire and Serial ports when communicating with the VEML7700.
+ * 
+ * Want to support open source hardware? Buy a board from SparkFun!
+ * <br>SparkX smôl Environmental Peripheral Board (SPX-18976): https://www.sparkfun.com/products/18976
+ * 
+ * Please see LICENSE.md for the license information
+ * 
+ */
+
+#include <SparkFun_VEML7700_Arduino_Library.h> // Click here to get the library: http://librarymanager/All#SparkFun_VEML7700
+
+VEML7700 mySensor; // Create a VEML7700 object
+
+#define myWire Wire // Change this to (e.g.) Wire1 if required
+#define mySerial Serial // Change this to (e.g.) Serial1 if required
+
+void setup()
+{
+  mySerial.begin(115200);
+  mySerial.println(F("SparkFun VEML7700 Example"));
+
+  myWire.begin();
+
+  //mySensor.enableDebugging(mySerial); // Uncomment this line to enable helpful debug messages on mySerial
+
+  // Begin the VEML7700 using the myWire I2C port
+  // .begin will return true on success, or false on failure to communicate
+  if (mySensor.begin(myWire) == false)
+  {
+    mySerial.println("Unable to communicate with the VEML7700. Please check the wiring. Freezing...");
+    while (1)
+      ;
+  }
+
+  mySerial.println(F("Lux:"));
+}
+
+void loop()
+{
+  mySerial.println(mySensor.getLux(), 4); // Read the lux from the sensor and print it
+  delay(250);
+}