Initial commit of Arduino libraries

RadioLib/examples/SX126x/SX126x_Channel_Activity_Detection_Interrupt/SX126x_Channel_Activity_Detection_Interrupt.ino

@@ -0,0 +1,114 @@
+/*
+  RadioLib SX126x Channel Activity Detection Example
+
+  This example uses SX1262 to scan the current LoRa
+  channel and detect ongoing LoRa transmissions.
+  Unlike SX127x CAD, SX126x can detect any part
+  of LoRa transmission, not just the preamble.
+
+  Other modules from SX126x family can also be used.
+
+  For default module settings, see the wiki page
+  https://github.com/jgromes/RadioLib/wiki/Default-configuration#sx126x---lora-modem
+
+  For full API reference, see the GitHub Pages
+  https://jgromes.github.io/RadioLib/
+*/
+
+// include the library
+#include <RadioLib.h>
+
+// SX1262 has the following connections:
+// NSS pin:   10
+// DIO1 pin:  2
+// NRST pin:  3
+// BUSY pin:  9
+SX1262 radio = new Module(10, 2, 3, 9);
+
+// or detect the pinout automatically using RadioBoards
+// https://github.com/radiolib-org/RadioBoards
+/*
+#define RADIO_BOARD_AUTO
+#include <RadioBoards.h>
+Radio radio = new RadioModule();
+*/
+
+// flag to indicate that a packet was detected or CAD timed out
+volatile bool scanFlag = false;
+
+// this function is called when a complete packet
+// is received by the module
+// IMPORTANT: this function MUST be 'void' type
+//            and MUST NOT have any arguments!
+#if defined(ESP8266) || defined(ESP32)
+  ICACHE_RAM_ATTR
+#endif
+void setFlag(void) {
+  // something happened, set the flag
+  scanFlag = true;
+}
+
+void setup() {
+  Serial.begin(9600);
+
+  // initialize SX1262 with default settings
+  Serial.print(F("[SX1262] Initializing ... "));
+  int state = radio.begin();
+  if (state == RADIOLIB_ERR_NONE) {
+    Serial.println(F("success!"));
+  } else {
+    Serial.print(F("failed, code "));
+    Serial.println(state);
+    while (true) { delay(10); }
+  }
+
+  // set the function that will be called
+  // when LoRa packet or timeout is detected
+  radio.setDio1Action(setFlag);
+
+  // start scanning the channel
+  Serial.print(F("[SX1262] Starting scan for LoRa preamble ... "));
+  state = radio.startChannelScan();
+  if (state == RADIOLIB_ERR_NONE) {
+    Serial.println(F("success!"));
+  } else {
+    Serial.print(F("failed, code "));
+    Serial.println(state);
+  }
+}
+
+void loop() {
+  // check if the flag is set
+  if(scanFlag) {
+    // reset flag
+    scanFlag = false;
+
+    // check CAD result
+    int state = radio.getChannelScanResult();
+
+    if (state == RADIOLIB_LORA_DETECTED) {
+      // LoRa packet was detected
+      Serial.println(F("[SX1262] Packet detected!"));
+
+    } else if (state == RADIOLIB_CHANNEL_FREE) {
+      // channel is free
+      Serial.println(F("[SX1262] Channel is free!"));
+
+    } else {
+      // some other error occurred
+      Serial.print(F("[SX1262] Failed, code "));
+      Serial.println(state);
+
+    }
+
+    // start scanning the channel again
+    Serial.print(F("[SX1262] Starting scan for LoRa preamble ... "));
+    state = radio.startChannelScan();
+    if (state == RADIOLIB_ERR_NONE) {
+      Serial.println(F("success!"));
+    } else {
+      Serial.print(F("failed, code "));
+      Serial.println(state);
+    }
+  }
+}