Initial commit of Arduino libraries

RadioLib/examples/RF69/RF69_Transmit_AES/RF69_Transmit_AES.ino

@@ -0,0 +1,90 @@
+/*
+  RadioLib RF69 Transmit with AES Example
+
+  This example transmits packets using RF69 FSK radio module.
+  Packets are encrypted using hardware AES.
+  NOTE: When using address filtering, the address byte is NOT encrypted!
+
+  For default module settings, see the wiki page
+  https://github.com/jgromes/RadioLib/wiki/Default-configuration#rf69sx1231
+
+  For full API reference, see the GitHub Pages
+  https://jgromes.github.io/RadioLib/
+*/
+
+// include the library
+#include <RadioLib.h>
+
+// RF69 has the following connections:
+// CS pin:    10
+// DIO0 pin:  2
+// RESET pin: 3
+RF69 radio = new Module(10, 2, 3);
+
+// or detect the pinout automatically using RadioBoards
+// https://github.com/radiolib-org/RadioBoards
+/*
+#define RADIO_BOARD_AUTO
+#include <RadioBoards.h>
+Radio radio = new RadioModule();
+*/
+
+void setup() {
+  Serial.begin(9600);
+
+  // initialize RF69 with default settings
+  Serial.print(F("[RF69] Initializing ... "));
+  int state = radio.begin();
+  if (state == RADIOLIB_ERR_NONE) {
+    Serial.println(F("success!"));
+  } else {
+    Serial.print(F("failed, code "));
+    Serial.println(state);
+    while (true) { delay(10); }
+  }
+
+  // set AES key to encrypt the packet
+  // NOTE: the key must be exactly 16 bytes long!
+  uint8_t key[] = {0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+                   0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F};
+  radio.setAESKey(key);
+
+  // enable AES encryption
+  radio.enableAES();
+
+  // AES encryption can also be disabled
+  /*
+    radio.disableAES();
+  */
+}
+
+void loop() {
+  Serial.print(F("[RF69] Transmitting packet ... "));
+
+  // you can transmit C-string or Arduino string up to 64 characters long
+  int state = radio.transmit("Hello World!");
+
+  // you can also transmit byte array up to 64 bytes long
+  /*
+    byte byteArr[] = {0x01, 0x23, 0x45, 0x67, 0x89, 0xAB, 0xCD, 0xEF};
+    int state = radio.transmit(byteArr, 8);
+  */
+
+  if (state == RADIOLIB_ERR_NONE) {
+    // the packet was successfully transmitted
+    Serial.println(F("success!"));
+
+  } else if (state == RADIOLIB_ERR_PACKET_TOO_LONG) {
+    // the supplied packet was longer than 64 bytes
+    Serial.println(F("too long!"));
+
+  } else {
+    // some other error occurred
+    Serial.print(F("failed, code "));
+    Serial.println(state);
+
+  }
+
+  // wait for a second before transmitting again
+  delay(1000);
+}