Initial commit of Arduino libraries

RadioLib/examples/Pager/Pager_Transmit/Pager_Transmit.ino

@@ -0,0 +1,106 @@
+/*
+  RadioLib Pager (POCSAG) Transmit Example
+
+  This example sends POCSAG messages using SX1278's
+  FSK modem.
+
+  Other modules that can be used to send POCSAG:
+  - SX127x/RFM9x
+  - RF69
+  - SX1231
+  - CC1101
+  - SX126x
+  - nRF24
+  - Si443x/RFM2x
+  - SX128x
+
+  For default module settings, see the wiki page
+  https://github.com/jgromes/RadioLib/wiki/Default-configuration
+
+  For full API reference, see the GitHub Pages
+  https://jgromes.github.io/RadioLib/
+*/
+
+// include the library
+#include <RadioLib.h>
+
+// SX1278 has the following connections:
+// NSS pin:   10
+// DIO0 pin:  2
+// RESET pin: 9
+// DIO1 pin:  3
+SX1278 radio = new Module(10, 2, 9, 3);
+
+// or detect the pinout automatically using RadioBoards
+// https://github.com/radiolib-org/RadioBoards
+/*
+#define RADIO_BOARD_AUTO
+#include <RadioBoards.h>
+Radio radio = new RadioModule();
+*/
+
+// create Pager client instance using the FSK module
+PagerClient pager(&radio);
+
+void setup() {
+  Serial.begin(9600);
+
+  // initialize SX1278 with default settings
+  Serial.print(F("[SX1278] Initializing ... "));
+  int state = radio.beginFSK();
+
+  // when using one of the non-LoRa modules
+  // (RF69, CC1101, Si4432 etc.), use the basic begin() method
+  // int state = radio.begin();
+
+  if(state == RADIOLIB_ERR_NONE) {
+    Serial.println(F("success!"));
+  } else {
+    Serial.print(F("failed, code "));
+    Serial.println(state);
+    while (true) { delay(10); }
+  }
+
+  // initialize Pager client
+  Serial.print(F("[Pager] Initializing ... "));
+  // base (center) frequency:     434.0 MHz
+  // speed:                       1200 bps
+  state = pager.begin(434.0, 1200);
+  if(state == RADIOLIB_ERR_NONE) {
+    Serial.println(F("success!"));
+  } else {
+    Serial.print(F("failed, code "));
+    Serial.println(state);
+    while (true) { delay(10); }
+  }
+}
+
+void loop() {
+  Serial.print(F("[Pager] Transmitting messages ... "));
+
+  // the simples form of "message" is just a tone on the destination pager
+  int state = pager.sendTone(1234567);
+  delay(500);
+
+  // next, transmit numeric (BCD) message to the destination pager
+  // NOTE: Only characters 0123456789*U-() and space
+  //       can be sent in a BCD message!
+  state |= pager.transmit("0123456789*U -()", 1234567);
+  delay(500);
+
+  // finally, let's transmit an ASCII message now
+  state |= pager.transmit("Hello World!", 1234567, RADIOLIB_PAGER_ASCII);
+  delay(500);
+
+  // we can also send only a tone
+
+  if(state == RADIOLIB_ERR_NONE) {
+    Serial.println(F("success!"));
+  } else {
+    Serial.print(F("failed, code "));
+    Serial.println(state);
+  }
+
+  // wait for a second before transmitting again
+  delay(3000);
+}