Initial commit of Arduino libraries
This commit is contained in:
@@ -0,0 +1,257 @@
|
||||
/****************************************************************************************************************************
|
||||
FullyFeature-ESP32_ENC.ino
|
||||
|
||||
AsyncMQTT_ESP32 is a library for ESP32 boards using WiFi or LwIP W5500, LAN8720 or ENC28J60
|
||||
|
||||
Based on and modified from :
|
||||
|
||||
1) async-mqtt-client (https://github.com/marvinroger/async-mqtt-client)
|
||||
2) async-mqtt-client (https://github.com/khoih-prog/AsyncMQTT_Generic)
|
||||
|
||||
Built by Khoi Hoang https://github.com/khoih-prog/AsyncMQTT_ESP32
|
||||
*****************************************************************************************************************************/
|
||||
/*
|
||||
This example uses FreeRTOS softwaretimers as there is no built-in Ticker library
|
||||
*/
|
||||
|
||||
#include "defines.h"
|
||||
|
||||
extern "C"
|
||||
{
|
||||
#include "freertos/FreeRTOS.h"
|
||||
#include "freertos/timers.h"
|
||||
}
|
||||
|
||||
#include <AsyncMQTT_ESP32.h>
|
||||
|
||||
//#define MQTT_HOST IPAddress(192, 168, 2, 110)
|
||||
#define MQTT_HOST "broker.emqx.io" // Broker address
|
||||
#define MQTT_PORT 1883
|
||||
|
||||
const char *PubTopic = "async-mqtt/ESP32_ENC_Pub"; // Topic to publish
|
||||
|
||||
AsyncMqttClient mqttClient;
|
||||
TimerHandle_t mqttReconnectTimer;
|
||||
|
||||
void connectToMqtt()
|
||||
{
|
||||
Serial.println("Connecting to MQTT...");
|
||||
mqttClient.connect();
|
||||
}
|
||||
|
||||
void ETH_event(WiFiEvent_t event)
|
||||
{
|
||||
switch (event)
|
||||
{
|
||||
#if USING_CORE_ESP32_CORE_V200_PLUS
|
||||
|
||||
case ARDUINO_EVENT_ETH_START:
|
||||
Serial.println("ETH starting");
|
||||
break;
|
||||
|
||||
case ARDUINO_EVENT_ETH_CONNECTED:
|
||||
Serial.println("ETH connected");
|
||||
break;
|
||||
|
||||
case ARDUINO_EVENT_ETH_GOT_IP:
|
||||
Serial.println("ETH got IP");
|
||||
Serial.print("IP address: ");
|
||||
Serial.println(ETH.localIP());
|
||||
connectToMqtt();
|
||||
break;
|
||||
|
||||
case ARDUINO_EVENT_ETH_DISCONNECTED:
|
||||
Serial.println("ETH lost connection");
|
||||
|
||||
// ensure we don't reconnect to MQTT when no ETH
|
||||
xTimerStop(mqttReconnectTimer, 0);
|
||||
|
||||
break;
|
||||
|
||||
case ARDUINO_EVENT_ETH_STOP:
|
||||
Serial.println("ETH stops");
|
||||
|
||||
// ensure we don't reconnect to MQTT when no ETH
|
||||
xTimerStop(mqttReconnectTimer, 0);
|
||||
|
||||
break;
|
||||
#else
|
||||
|
||||
case SYSTEM_EVENT_ETH_CONNECTED:
|
||||
erial.println(F("ETH Connected"));
|
||||
break;
|
||||
|
||||
case SYSTEM_EVENT_ETH_GOT_IP:
|
||||
Serial.println("ETH connected");
|
||||
Serial.println("IP address: ");
|
||||
Serial.println(ETH.localIP());
|
||||
connectToMqtt();
|
||||
break;
|
||||
|
||||
case SYSTEM_EVENT_ETH_DISCONNECTED:
|
||||
case SYSTEM_EVENT_ETH_STOP:
|
||||
Serial.println("ETH lost connection");
|
||||
|
||||
// ensure we don't reconnect to MQTT when no ETH
|
||||
xTimerStop(mqttReconnectTimer, 0);
|
||||
|
||||
break;
|
||||
#endif
|
||||
|
||||
default:
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
void printSeparationLine()
|
||||
{
|
||||
Serial.println("************************************************");
|
||||
}
|
||||
|
||||
void onMqttConnect(bool sessionPresent)
|
||||
{
|
||||
Serial.print("Connected to MQTT broker: ");
|
||||
Serial.print(MQTT_HOST);
|
||||
Serial.print(", port: ");
|
||||
Serial.println(MQTT_PORT);
|
||||
Serial.print("PubTopic: ");
|
||||
Serial.println(PubTopic);
|
||||
|
||||
printSeparationLine();
|
||||
Serial.print("Session present: ");
|
||||
Serial.println(sessionPresent);
|
||||
|
||||
uint16_t packetIdSub = mqttClient.subscribe(PubTopic, 2);
|
||||
Serial.print("Subscribing at QoS 2, packetId: ");
|
||||
Serial.println(packetIdSub);
|
||||
|
||||
mqttClient.publish(PubTopic, 0, true, "ESP32_ENC Test");
|
||||
Serial.println("Publishing at QoS 0");
|
||||
|
||||
uint16_t packetIdPub1 = mqttClient.publish(PubTopic, 1, true, "test 2");
|
||||
Serial.print("Publishing at QoS 1, packetId: ");
|
||||
Serial.println(packetIdPub1);
|
||||
|
||||
uint16_t packetIdPub2 = mqttClient.publish(PubTopic, 2, true, "test 3");
|
||||
Serial.print("Publishing at QoS 2, packetId: ");
|
||||
Serial.println(packetIdPub2);
|
||||
|
||||
printSeparationLine();
|
||||
}
|
||||
|
||||
void onMqttDisconnect(AsyncMqttClientDisconnectReason reason)
|
||||
{
|
||||
(void) reason;
|
||||
|
||||
Serial.println("Disconnected from MQTT.");
|
||||
|
||||
if (ESP32_ENC_isConnected())
|
||||
{
|
||||
xTimerStart(mqttReconnectTimer, 0);
|
||||
}
|
||||
}
|
||||
|
||||
void onMqttSubscribe(const uint16_t& packetId, const uint8_t& qos)
|
||||
{
|
||||
Serial.println("Subscribe acknowledged.");
|
||||
Serial.print(" packetId: ");
|
||||
Serial.println(packetId);
|
||||
Serial.print(" qos: ");
|
||||
Serial.println(qos);
|
||||
}
|
||||
|
||||
void onMqttUnsubscribe(const uint16_t& packetId)
|
||||
{
|
||||
Serial.println("Unsubscribe acknowledged.");
|
||||
Serial.print(" packetId: ");
|
||||
Serial.println(packetId);
|
||||
}
|
||||
|
||||
void onMqttMessage(char* topic, char* payload, const AsyncMqttClientMessageProperties& properties,
|
||||
const size_t& len, const size_t& index, const size_t& total)
|
||||
{
|
||||
(void) payload;
|
||||
|
||||
Serial.println("Publish received.");
|
||||
Serial.print(" topic: ");
|
||||
Serial.println(topic);
|
||||
Serial.print(" qos: ");
|
||||
Serial.println(properties.qos);
|
||||
Serial.print(" dup: ");
|
||||
Serial.println(properties.dup);
|
||||
Serial.print(" retain: ");
|
||||
Serial.println(properties.retain);
|
||||
Serial.print(" len: ");
|
||||
Serial.println(len);
|
||||
Serial.print(" index: ");
|
||||
Serial.println(index);
|
||||
Serial.print(" total: ");
|
||||
Serial.println(total);
|
||||
}
|
||||
|
||||
void onMqttPublish(const uint16_t& packetId)
|
||||
{
|
||||
Serial.println("Publish acknowledged.");
|
||||
Serial.print(" packetId: ");
|
||||
Serial.println(packetId);
|
||||
}
|
||||
|
||||
void setup()
|
||||
{
|
||||
Serial.begin(115200);
|
||||
|
||||
while (!Serial && millis() < 5000);
|
||||
|
||||
delay(500);
|
||||
|
||||
Serial.print("\nStarting FullyFeature_ESP32_ENC on ");
|
||||
Serial.print(ARDUINO_BOARD);
|
||||
Serial.println(" with " + String(SHIELD_TYPE));
|
||||
Serial.println(WEBSERVER_ESP32_ENC_VERSION);
|
||||
Serial.println(ASYNC_MQTT_ESP32_VERSION);
|
||||
|
||||
AMQTT_LOGWARN(F("Default SPI pinout:"));
|
||||
AMQTT_LOGWARN1(F("MOSI:"), MOSI_GPIO);
|
||||
AMQTT_LOGWARN1(F("MISO:"), MISO_GPIO);
|
||||
AMQTT_LOGWARN1(F("SCK:"), SCK_GPIO);
|
||||
AMQTT_LOGWARN1(F("CS:"), CS_GPIO);
|
||||
AMQTT_LOGWARN1(F("INT:"), INT_GPIO);
|
||||
AMQTT_LOGWARN1(F("SPI Clock (MHz):"), SPI_CLOCK_MHZ);
|
||||
AMQTT_LOGWARN(F("========================="));
|
||||
|
||||
mqttReconnectTimer = xTimerCreate("mqttTimer", pdMS_TO_TICKS(2000), pdFALSE, (void*)0,
|
||||
reinterpret_cast<TimerCallbackFunction_t>(connectToMqtt));
|
||||
|
||||
mqttClient.onConnect(onMqttConnect);
|
||||
mqttClient.onDisconnect(onMqttDisconnect);
|
||||
mqttClient.onSubscribe(onMqttSubscribe);
|
||||
mqttClient.onUnsubscribe(onMqttUnsubscribe);
|
||||
mqttClient.onMessage(onMqttMessage);
|
||||
mqttClient.onPublish(onMqttPublish);
|
||||
|
||||
mqttClient.setServer(MQTT_HOST, MQTT_PORT);
|
||||
|
||||
///////////////////////////////////
|
||||
|
||||
// To be called before ETH.begin()
|
||||
WiFi.onEvent(ETH_event);
|
||||
|
||||
// start the ethernet connection and the server:
|
||||
// Use DHCP dynamic IP and random mac
|
||||
//bool begin(int MISO_GPIO, int MOSI_GPIO, int SCLK_GPIO, int CS_GPIO, int INT_GPIO, int SPI_CLOCK_MHZ,
|
||||
// int SPI_HOST, uint8_t *ENC28J60_Mac = ENC28J60_Default_Mac);
|
||||
//ETH.begin( MISO_GPIO, MOSI_GPIO, SCK_GPIO, CS_GPIO, INT_GPIO, SPI_CLOCK_MHZ, SPI_HOST );
|
||||
ETH.begin( MISO_GPIO, MOSI_GPIO, SCK_GPIO, CS_GPIO, INT_GPIO, SPI_CLOCK_MHZ, SPI_HOST, mac[millis() % NUMBER_OF_MAC] );
|
||||
|
||||
// Static IP, leave without this line to get IP via DHCP
|
||||
//bool config(IPAddress local_ip, IPAddress gateway, IPAddress subnet, IPAddress dns1 = 0, IPAddress dns2 = 0);
|
||||
//ETH.config(myIP, myGW, mySN, myDNS);
|
||||
|
||||
ESP32_ENC_waitForConnect();
|
||||
|
||||
///////////////////////////////////
|
||||
}
|
||||
|
||||
void loop()
|
||||
{
|
||||
}
|
||||
@@ -0,0 +1,75 @@
|
||||
/****************************************************************************************************************************
|
||||
defines.h
|
||||
AsyncMQTT_ESP32 is a library for ESP32 boards using WiFi or LwIP W5500, LAN8720 or ENC28J60
|
||||
|
||||
Based on and modified from :
|
||||
|
||||
1) async-mqtt-client (https://github.com/marvinroger/async-mqtt-client)
|
||||
2) async-mqtt-client (https://github.com/khoih-prog/AsyncMQTT_Generic)
|
||||
|
||||
Built by Khoi Hoang https://github.com/khoih-prog/AsyncMQTT_ESP32
|
||||
***************************************************************************************************************************************/
|
||||
|
||||
#ifndef defines_h
|
||||
#define defines_h
|
||||
|
||||
// Debug Level from 0 to 4
|
||||
#define _ETHERNET_WEBSERVER_LOGLEVEL_ 1
|
||||
#define _ASYNC_MQTT_LOGLEVEL_ 1
|
||||
|
||||
/////////////////////////////////////////////
|
||||
|
||||
// Optional values to override default settings
|
||||
//#define SPI_HOST 1
|
||||
//#define SPI_CLOCK_MHZ 8
|
||||
|
||||
// Must connect INT to GPIOxx or not working
|
||||
//#define INT_GPIO 4
|
||||
|
||||
//#define MISO_GPIO 19
|
||||
//#define MOSI_GPIO 23
|
||||
//#define SCK_GPIO 18
|
||||
//#define CS_GPIO 5
|
||||
|
||||
/////////////////////////////////////////////
|
||||
|
||||
#include <WebServer_ESP32_ENC.h> // https://github.com/khoih-prog/WebServer_ESP32_ENC
|
||||
|
||||
/////////////////////////////////////////////
|
||||
|
||||
// Enter a MAC address and IP address for your controller below.
|
||||
#define NUMBER_OF_MAC 20
|
||||
|
||||
byte mac[][NUMBER_OF_MAC] =
|
||||
{
|
||||
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x01 },
|
||||
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x02 },
|
||||
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x03 },
|
||||
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x04 },
|
||||
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x05 },
|
||||
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x06 },
|
||||
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x07 },
|
||||
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x08 },
|
||||
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x09 },
|
||||
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x0A },
|
||||
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x0B },
|
||||
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x0C },
|
||||
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x0D },
|
||||
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x0E },
|
||||
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x0F },
|
||||
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x10 },
|
||||
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x11 },
|
||||
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x12 },
|
||||
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x13 },
|
||||
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x14 },
|
||||
};
|
||||
|
||||
// Select the IP address according to your local network
|
||||
IPAddress myIP(192, 168, 2, 232);
|
||||
IPAddress myGW(192, 168, 2, 1);
|
||||
IPAddress mySN(255, 255, 255, 0);
|
||||
|
||||
// Google DNS Server IP
|
||||
IPAddress myDNS(8, 8, 8, 8);
|
||||
|
||||
#endif //defines_h
|
||||
Reference in New Issue
Block a user